Post your Race Parts 4 Sale HERE
 

Feel free to post your Race Parts for Sale here AND , as usual, in the "parts for sale" section you would normally use for your generation...(cross reference)

Questions? PM me...
BTW - if you are unfamiliar with Forum FOR SALE guidelines - you can re-read them here... :)

http://forums.corvetteforum.com/show...6&forum_id=109

http://forums.corvetteforum.com/show...8&forum_id=109

Out of date harness for sale (RCI), works well and looks great, just past it's date. THey are normally $150, I'll take $30 and you can get them rewebbed for cheap and still save $75. PM me

I need a transponder, anyone got one for sale?

Hawk HB101 pads (Wilwood Super Lite and other similar calipers)
HP Plus with 25 street miles $55
HPS with approx 500 street miles $50

SOLD!!!! :D






DRM C5 Master Cylinder.
From DRM site -"DRM C5/C6 Modified Master Cylinder

This is a must for all enthusiasts with an upgraded brake system and it works good with any brake package, our AP setup, Willwood, Etc. For use with street or race setup. With this Modified Master Cylinder you'll get a bigger Master Cylinder that means that there is more brake fluid flow and a upgraded brake pedal feel. With this Master Cylinder the proportioning valve is added so you can control how much rear braking you want. That comes in handy at the racetrack. The DRM Modified Master Cylinder fits under stock location designed to clear the stock hood. If you are looking for maximum in braking performance this is the ticket."

http://www.dougrippie.com/drm/brake_...re%20Regulator


Bought it (used) last year from dmtnt -I've changed plans and never used.

$400 + shipping.

383 stroker, D44 /w 410's etc. etc.
 

Anyone looking for a new 383 stroker?

How 'bout a newly re-built (zero miles) D44 with Dana 410 gear set?

Or a newly re-built 700r4 on steroids? That and much much more.

$8,500 buys it all. Check it out. :cheers:

http://forums.corvetteforum.com/show...12&forum_id=54

make offer
 

front and rear extreem springs for C-5..from VBP
went to coil overs,
johnny

Used DRM brake ducts for a C5 or C6. Has modified factory C6 ducts pop riveted to the end to work with a C6. If you inted to use on a C5 you can simply remove the additional ducting. The flexible ducting that goes to your spindle has been worn through so you will probably need to replace. Less than a month old.
***********************SOLD************* **************************************** *********************

Rebuilt Dana 44 w/ 3.45 gears, no miles on it. Includes rear bat wing $1500

FS:18x11 CCW track wheels and Goodyear race slicks
 

http://forums.corvetteforum.com/show...post1554822348

wheels used 5 weekends
Tires are take-offs from a Daytona Prototype from this year's Daytona 24 - have between 1 and 3 heat cycles - Goodyear G19 475 compound - fit great on the CCW's
Located near Charlotte, NC

mstam55@hotmail.com

*****SOLD*****

R3 B Head and Neck restraint
 

From the Engineer that invented the Hutchens Device®, comes the most advanced carbon restraint yet. The R3 passed the most comprehensive and brutal SFI spec. ever written. The R3 is a revolutionary new concept in head and neck restraint systems. The R3 solves issues with current carbon restraints. The R3 head and neck restraint travels with the occupant during a crash to help keep the relationship of the head, neck and torso consistent.

The R3 is a state of the art Carbon Fiber Head and Neck Restraint System certified SFI 38.1 and tested at 70G. Years of development and hundreds of sled test’s have made the R3 a Comfortable, Effective, Multiple Impact capable Head and Neck Restraint System. Size Large for chest measurements 42-48. This unit has been used for fitting only and has not been racing yet. New cost is over $1000 delivered. On sale for $785 shipped to anywhere in the continental US. Please e-mail me with any questions drd@bewired.com

Thanks

Jeff

why are you selling these ducts? I couldn't make them fit my C6

Are you referring to me? If so , you can make the DRM's fit a C6 it just takes some work and alot of time with cutting/sizing the existing factory ducts.Plus the instructions that come with the rippie's are the suck. I have already done all the work that DRM fails to tell you about and these come with the duct for the C6 already trimmed and attached.

VBP C5 Springs
 

What are the spring rates?

Big Azz mirror
 

Panaromic mirror See everyone behind you.
$35.00 Shipped
Clamps on you mirror Paypal or Money order

http://i83.photobucket.com/albums/j2...irrorclamp.jpg


17" wide
http://i83.photobucket.com/albums/j2...rC5/mirror.jpg

FS: Delan Trailer Hitch for C5
 

Like new. Used for one season of racing. Includes ball, new mounting hardware and instructions. $125

T1 shocks and springs
 

Used T1 shocks and springs. Got them 2 years ago from LG Motorsports in Dallas. Combined with T1 bars and slicks my 98 stock vert could run circles around Z06's with slicks on the road course. Asking $950 plus shipping firm. On GM Parts direct they are $1900 plus shipping new. email david.cheese@sbcglobal.net

L98 Corvette A/C eliminator bracket
 

See link to C4 parts for sale

http://forums.corvetteforum.com/show....php?t=1389787

4 Michelin Pilot Sport Cups
 

275/40x17 less than 50 street miles so like new. $750 Atlanta area only.

......sold