I've had one of Top Flight's front plate mount kits on my '12 Z06 for about 8 months and it's been great. When I don't want the plate, I just reach under the front end, unscrew the wing nuts and take the plate off.

When I need it on, it take about 45 seconds to put it back in place.

Neat product!

:thumbs: Thank you for posting Hib :cheers:

Do you guys have any pictures of the BERLIN BLUE METALLIC installed? Here is the RPO code for my color car GXH.

Thanks

BERLIN BLUE METALLIC is not a Vette color

I looked over the paperwork for the car it's actually Midnight Racer Blue. Does this holder come with everything I need to mount it to the front of the car?

http://www.topflightrepro.com/corvet...e-frames.shtml

Thanks

Hi Joe, you would need to order the front license plate bracket p/n 0010003-3 which comes with all the necessary hardware and the optional Nite Race Blue frame, both are in stock :cheers:

Hi Peter, thanks for the information I'm trying to locate part numbers on your website any way you can provide the link to this item? :cheers:

Correction, I found the item with that part number but I can't choose a color only option is to add to cart.

Hi Joe, there isn't a color option for the license plate bracket, the Nite Race Blue colored frame is an additional part :cheers:

Thanks I'm going to order both of them. :yesnod:

Thank you :cheers:

Highly recommend these as the best solution to the pesky front license plate law.
https://cimg8.ibsrv.net/gimg/www.cor...55707434b2.jpg


https://cimg2.ibsrv.net/gimg/www.cor...3040d083fd.jpg

Good looking product

If I was to install a plate, I would use this bracket

Thank you :cheers:

Thank you :cheers:

Great pic to show the set up. :thumbs:

:thumbs::cheers:

:seeya Hi Folks, Ray and I have decided that it was time for Top Flight Reproductions www.topflightrepro.com to become a Forum Vendor. For those of you who live in states that require two plates and are interested in a front mount, Top Flight Reproductions has a permanent and removable mount for the C6 and a C6 Z06 removable mount as well . We also sell the GM colored license plate frames which really dress up the front mount. The Installation is very easy, requires no lifting of the car. We have had this product out for over 2 1/2 years now and the customer satisfaction has been fantastic. We appreciate all the nice comments from you forum members who have purchased these products along with inputs for making our product better, we thank you.:thumbs: For those of you who haven't heard of us, check out our website at www.topflightrepro.com or give us a call at 781-279-1279 and ask for Ray. We look forward to hearing from you.

In Stock!

The Top Flight Reproductions C6 front license plate bracket is the best looking mount available. It follows the contour of the front bumper, easy to install, and is priced considerably lower than other after market solutions.

All three Top Flight Reproductions front license plate brackets are in stock and ready to ship. Visit our website at www.topflightrepro.com or call 781-279-1279 and ask for Ray.

http://i113.photobucket.com/albums/n...DSC_0010-2.jpg

http://i113.photobucket.com/albums/n.../LeftFront.jpg

http://i113.photobucket.com/albums/n...ont-Close2.jpg

http://i113.photobucket.com/albums/n...acketiso-1.jpg

I have been using this system to run a front plate for the last two years on my C6Z06 and there is one drawback.
I was driving around town last week and noticed that in this 100* weather my water temps were between 220-225* (this was just normal traffic and not bumper-to-bumper, stop and go).

I stopped to fill up with gas and removed the plate using the quick release function. I went back to driving and my temps promptly came down and stabilized around 196*.

I guess that I may have to run plateless until Fall.

The car has been modded but has the enlarged capacity DeWitt radiator with a 160* stat and reprogrammed fan.

I will continue to use the system and run the plate when the weather allows.

You had the bracket on for two years and you just noticed the problem now? Maybe it was something else....I have the same bracket on my 427 Convertible and have never had a problem with the temp and my car is all factory stock, no mods :cheers:

A very simple experiment to replicate.