CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C6 Corvette ZR1 & Z06 (https://www.corvetteforum.com/forums/c6-corvette-zr1-and-z06-136/)
-   -   [Z06] Ranger Stock C6Z06 on Drag Radials 0-135 in 11 Seconds, in mp3 (https://www.corvetteforum.com/forums/c6-corvette-zr1-and-z06/1548174-ranger-stock-c6z06-on-drag-radials-0-135-in-11-seconds-in-mp3.html)

Ranger 11-12-2006 03:56 PM

Ranger Stock C6Z06 on Drag Radials 0-135 in 11 Seconds, in mp3
 
One of the good things about instrumenting the car at the drag strip is what can be learned from studying the data.

Here, in .wav format, is a sound file of my stock 2006 Z06 being launched and run through the gears to 135 before lifting. Run was made at MIR on November 4th, the 10.85 pass.

Play Ranger.LS7.Rhapsody.wav

Analysis of the sound file permits precise timing of the shifts and elapsed time from start of the launch. On this pass at MIR, the car accelerated from

0 to 60 (the 1-2 shift) in 3.09 seconds.
0 to 120 (the 3-4 shift) in 8.78 seconds.

Keep in mind that the car was on drag radials on a prepared surface

So crank up the volume and enjoy the LS7 Rhapsody, a Z06 at full song.

Edit: Sorry for the delay. Putstuff (still in beta) doesn't work. Never would have imagined that finding a site to host an audio file for download would be such a pain. It's up on Putfile, now. Just play no download.

Ranger

Pio 11-12-2006 04:38 PM

JEEZ-US!!:thumbs: :willy: :cheers:

vegasdude 11-12-2006 04:39 PM

The video's were awesome.............!!

Short-Throw 11-12-2006 04:42 PM


Originally Posted by vegasdude
Linky no worky!

Vegas......:toetap:


Originally Posted by Ranger
Download Ranger.LS7.Rhapsody.mp3 stand by for the upload to be completed; sorry for the delay.

:D

keagan 11-12-2006 04:49 PM

i cant get it to work, someone plz upload somehwere else!

Luweegy 11-12-2006 04:59 PM

It won't work for me either.If Ranger did it it's got tobe good.Any other way to get it?

C5A4TT 11-12-2006 05:01 PM


Originally Posted by Luweegy
It won't work for me either.If Ranger did it it's got tobe good.Any other way to get it?

:iagree:

Short-Throw 11-12-2006 05:03 PM


Originally Posted by Ranger
stand by for the upload to be completed; sorry for the delay.

He's uploading gang.....give him a sec......

vetterlatethannever 11-12-2006 05:33 PM

Can't wait!

Wanderer Z06 11-12-2006 05:39 PM


Originally Posted by Luweegy
It won't work for me either.If Ranger did it it's got tobe good.Any other way to get it?

Same here.

vetterlatethannever 11-12-2006 05:58 PM

:bigears

checkmate 11-12-2006 06:35 PM

That is awesome. :thumbs:

this link should work:
http://files.filefront.com//;6177351;;/
(just follow the directions to get it to download)

vette-oholic 11-12-2006 06:58 PM

0-60 in 3.1 sec?? wow i didnt think that was possible...
Do you think that < 3.0 is achievable??

RENNtech 11-12-2006 07:06 PM

Music in motion, sounded great!!!. . . ...:cheers:

A very imaginative idea too!!!!. . . . .:thumbs:

Ranger 11-12-2006 07:08 PM


Originally Posted by vette-oholic
0-60 in 3.1 sec?? wow i didnt think that was possible...
Do you think that < 3.0 is achievable??

My car is stock; so Torque Management intervenes on launch and the shifts. I know that because I've instrumented the car with a borrowed data logger. (Thanks, Dick)

With that in mind, I doubt there is much more for me to drop in the 60' or 60'-330'. I did leave some hundredths (estimated 6) on the table by unintentionally short shifting the 2-3 at 6700 vice 7000. But then again the 1-2 and 3-4 shift point were very good. It's hard to get every perfect on a single pass.

Ranger

dgdoc 11-12-2006 07:23 PM

If you really want to have some fun with this, realize that the 3.1 0-60 estimate doesn't include the 12 inch roll-out that all the magazines use in their performance measurements. This is done to syncronize the magazine times with the way timing is done at the drag strip.

On a C6Z (with Ranger driving), the first 12 inches take about 0.33 of a second.

You do the math....:thumbs:

427Z 11-12-2006 07:51 PM

i posted a video from the putfile site a while a go and it got locked. mods said the site had adult tracker software installed

sound works, video doesnt

Waveblaster785 11-12-2006 08:01 PM


Originally Posted by Ranger
One of the good things about instrumenting the car at the drag strip is what can be learned from studying the data.

Here, in .wav format, is a sound file of my stock 2006 Z06 being launched and run through the gears to 135 before lifting. Run was made at MIR on November 4th, the 10.85 pass.

Play Ranger.LS7.Rhapsody.wav

Analysis of the sound file permits precise timing of the shifts and elapsed time from start of the launch. On this pass at MIR, the car accelerated from

0 to 60 (the 1-2 shift) in 3.09 seconds.
0 to 120 (the 3-4 shift) in 8.78 seconds.

Keep in mind that the car was on drag radials on a prepared surface

So crank up the volume and enjoy the LS7 Rhapsody, a Z06 at full song.

Edit: Sorry for the delay. Putstuff (still in beta) doesn't work. Never would have imagined that finding a site to host an audio file for download would be such a pain. It's up on Putfile, now. Just play no download.

Ranger

This is just funny, and the most rediculous thing I've ever seen on the internet.

Nice voice over though. :rofl: :rofl: :rofl: :rofl:

http://forums.corvetteforum.com/show....php?t=1548287

Also, according to your math....
0-60 in 3.09
60-120 in about 5.5
and 120-129 took 2 full seconds and some change??....according to your timeslip.

vegasdude 11-12-2006 08:21 PM


Originally Posted by Short-Throw
Vegas......:toetap:



:D

It no worky, then I view video............!!:ack:

355Spider 11-12-2006 09:33 PM


Originally Posted by vette-oholic
0-60 in 3.1 sec?? wow i didnt think that was possible...
Do you think that < 3.0 is achievable??

2.9 for me but mine has 22hp more than stock.


All times are GMT -4. The time now is 02:52 PM.


© 2024 MH Sub I, LLC dba Internet Brands