C5 Z06 Wheels Rubbing at Track
 

I'm making this post for a friend (boilerrxc6) who I helped move this week when we discovered that after one day at Putnam his C5 Z06 wheels and OEM supercars he purchased were completely corded on the inside. The damage was pretty impressive (6/32 outside, cords from rubbing near the inside). Not camber wear.

I'm not sure the full details, but I believe he has the ride control and is lowered 1". LPE did the alignment. Track was Putnam Park. No cooling ducts.

Has anyone else experienced the same problem?

You may want to post this the Autocross&Roadrace section. Alot of the C6 guys that run this setup frequent that forum.