UPDATE #13...Katech's LS7...Fuel Cell Covers...more to come very soon...PICS!!!
With race season less than a month away for us snowbirds, time is creeping up fast. Katech has lived up to their end of the bargain and has finished my LS7. The Custom manifold and wiring harness should arrive shortly and then we'll be able to dyno this puppy. As far as the car itself, it's back in the fabrication room without a floorboard. We figured out a way to make the Recaro I wanted with side head restraints fit. Not an easy task with the roofline of the Corvette.
These next 3-4 weeks should yield some real progress. The history is in these threads: First Post My Z06 will no longer be my fastest car, but it's still my favorite Second Post PICS UPDATE #1: The LS2-LS7 Swap Race Car Project PICS !!! Third Post PICS UPDATE #2: PICS Update #2 Bye Bye LS2... Make way for the LS7PICS !!! Fourth Post PICS...UPDATE #3...Hopefully it will look like a Corvette again. PICS!!! Fifth Post PICS----UPDATE #4---The most revealing shots yet, she is down to the bone!---PICS !!! Sixth Post PICS---UPDATE #5---LS7 to undergo operation at KATECH---PICS !!! Seventh Post MORE PICS !!!...UPDATE #6...Hopefully I'll Never Need It...PICS !!! Eighth Post GREAT DETAILED PICS!!! UPDATE #7...The LS7 Is disassembled ...PICS !!! Ninth Post Pics !!!...here We Go...update #8...fabrication Room Pics !!! Tenth Post PICS PICS and more PICS...UPDATE #9...Inside the LS7 Eleventh Post[ PICS!!!...UPDATE #10....Project LS7 Katech race car...PICS !!! Twelfth Post PICS !!!...UPDATE #11...LS7 Race car...Katech, Pratt&MIller & Dailey Sump..PICS !!! Thirteenth Post UPDATE #12...LS7 Katech Racing Engine Pics...Eyecandy at it's best...PICS!!! Below are a few updated pics. The fuel cell covers came out beautifully and really smooth out the bottom of the car with very little disturbance. Katech's LS7 looks like a caged lion! Here were the last pics of the fuel cells before the protective covers were made. http://natetross.com/db1/00100/natet.../DSC00968R.JPG http://natetross.com/db1/00100/natet.../DSC00969R.JPG Here is the finished look: http://natetross.com/db1/00100/natet.../DSC00976R.JPG Look how the bottom plate finishes off the underside. http://natetross.com/db1/00100/natet.../DSC00977R.JPG http://natetross.com/db1/00100/natet.../DSC00978R.JPG Here are the finishing stages of Katech's power-plant! http://www.katechengines.com/street_...2/DSCF4806.JPG http://www.katechengines.com/street_...2/DSCF4807.JPG http://www.katechengines.com/street_...2/DSCF4809.JPG http://www.katechengines.com/street_...2/DSCF4810.JPG In the next few weeks things should start happening at a much quicker pace! Katech's engine reminds when you've just washed your car, you just want to drive it and enjoy the sparkle! I can't wait to get that thing dirty! Mike :cheers: |
Nice!
Looks like progress. Before you know it, it will all start to fall in place like magic.:D |
Looking good Mike!! :cheers:
|
:cool:
Great Progress ! |
When they dyno it are they going to use an engine dyno or chassis dyno? It would be cool to see both.
|
Hey Mike,
Looking good. Make sure you get an audio clip of when they first breath life into that beast. I'm sure we will all want to here the first scream out of that baby:cheers: |
Originally Posted by GaryZ06
(Post 1559256076)
When they dyno it are they going to use an engine dyno or chassis dyno? It would be cool to see both.
|
Originally Posted by Z Fast
(Post 1559257286)
Hey Mike,
Looking good. Make sure you get an audio clip of when they first breath life into that beast. I'm sure we will all want to here the first scream out of that baby:cheers: |
Originally Posted by outnumbered
(Post 1559255349)
Nice!
Looks like progress. Before you know it, it will all start to fall in place like magic.:D |
Originally Posted by GaryZ06
(Post 1559256076)
When they dyno it are they going to use an engine dyno or chassis dyno? It would be cool to see both.
I may Dyno chassis it afterwards. My shop's Dyno is not set up like many others we read about. They use the Dyno as a tool not a measuring stick thus it's not set up for marketing numbers. Different Dynos show different HP and we all know Dynos can be manipulated. Let me know how much HP you'd like to see, we can set it there! :lol: Mike :cheers: |
Originally Posted by Z Fast
(Post 1559257286)
Hey Mike,
Looking good. Make sure you get an audio clip of when they first breath life into that beast. I'm sure we will all want to here the first scream out of that baby:cheers: :iagree: |
Originally Posted by Short-Throw
(Post 1559257749)
Dan, the only thing falling in place is my hair on the floor! :willy:
|
Nice to see my updated 'crack' thread .
Motor looks tits. Fab works are sweet. I agree w/others . Show some Vid when that beast is dyno'd. Share your pain on the cold :ack: It's freakin Brrr here ! |
Originally Posted by Katech
(Post 1559257359)
I'll make sure to take a vid for you guys.
I thought you said that was going to be pay-per-view! :D |
Originally Posted by Short-Throw
(Post 1559258577)
Jason,
I thought you said that was going to be pay-per-view! :D |
Originally Posted by roboz
(Post 1559258000)
Nice to see my updated 'crack' thread .
Motor looks tits. Fab works are sweet. I agree w/others . Show some Vid when that beast is dyno'd. Share your pain on the cold :ack: It's freakin Brrr here ! If you like the motor now, wait til you see the manifold. ;) I'd love a pic of my new beast next to your new two-wheeled ride! :cool: Now think......warm and sunny, warm and sunny...if we think it, it will come. Mike :cheers: |
WOW WOW WOW!!!
Those tanks are unreal!! What craftsmanship!! Waiting on the engine pics to load...seems there may be a little problem.. Adam |
Thats Hott ! Looks really good, Mike...
Rich |
Originally Posted by Short-Throw
(Post 1559255240)
http://natetross.com/db1/00100/natet.../DSC00976R.JPG http://natetross.com/db1/00100/natet.../DSC00977R.JPG http://www.katechengines.com/street_...2/DSCF4810.JPG Mike :cheers: Mike, you are a man with vision. This is really turning out nice. It is cool enough to be a show car, but what a hot rod it will be. Mike |
Originally Posted by Adam Boca
(Post 1559259346)
WOW WOW WOW!!!
Those tanks are unreal!! What craftsmanship!! Waiting on the engine pics to load...seems there may be a little problem.. Adam Pics seem to be ok now. Although when you posted they were down.:confused: Can you see now? |
All times are GMT -4. The time now is 02:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands