WTB: AIR pump eliminator kit
I bought a used air pump here on the forum and it's junk.. I broke mine trying to gut it so now I'm stuck, unable to get the car back together and running..
Does anyone have a air pump eliminator kit or setup you can part with? New or used.. I have PayPal funds waiting.. Thanks, |
i just wanted to wish you lots of luck! i been watching here and flea-bay, and just found one there a couple of weeks ago, paid 110.00 for it! wish you luck, and all else fails, i think ecklers has for 175.00.
|
If your handy you can build one. If your interested, I'll post info on the one I built. :cheers:
|
:rofl: :iagree: quite easy to duplicate! now that i have one:willy:
|
hey agent 86! i like your car! mine is identical, same year, color! i put chrome zr1 rims 275 45 17 front, 315 35 17 rears goodyear f1 on, really woke the look of it up alot!
|
I took a look under your hood Agent86.. I ain't THAT handy :ack: :lol:
If I don't get something lined up by Monday, I'll just shell out the money and get what will work.. Thanks~ |
all you really need is some 1 inch flat stock, 1/2 inch thick, some spacers, and a tensioner pulley. could be made rather easily.
|
FWIW, the Mid America one is $149 if I remember right...and you guys are right...it ain't a whole lot of high technology making these...lol.
http://home.comcast.net/~rel3rd/wsb/...2/site1404.jpg |
$80 plus ship
I have one that I'm not going to use since I'll be installing a procharger that does away with the smog pump anyway.
It's the one in this picture: http://members.shaw.ca/vettek/REDVETTE%20162.jpg Tom |
Tom, sending you PM..
|
PayPal sent Tom,
Thanks again for the fair deal :thumbs: |
info?
i would like to see the info you have on these...
please post.... thanks
Originally Posted by AGENT 86
(Post 1559823086)
If your handy you can build one. If your interested, I'll post info on the one I built. :cheers:
|
Originally Posted by ladystoy69
(Post 1559854270)
i would like to see the info you have on these...
please post.... thanks Due to differences in printers, make a cardboard or plywood template before cutting aluminum, to check for fit. :cheers: |
thanks
thanks
Originally Posted by AGENT 86
(Post 1559855015)
http://members.shaw.ca/dankai/Air%20...Delete%20Info/
Due to differences in printers, make a cardboard or plywood template before cutting aluminum, to check for fit. :cheers: |
All times are GMT -4. The time now is 11:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands