CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C6 Forced Induction/Nitrous (https://www.corvetteforum.com/forums/c6-forced-induction-nitrous-123/)
-   -   Plate kit installled with photos.... (https://www.corvetteforum.com/forums/c6-forced-induction-nitrous/1813150-plate-kit-installled-with-photos.html)

gtodoug 09-14-2007 07:25 PM

Plate kit installled with photos....
 
Just want to give a big thanks to the guys over at Horsepower Sales in Pompano Beach. I just got the car delivered to my house and I'm impressed. I have not had a chance to really drive it yet, but it is going to be a blast I'm sure.

My wife and I just had a baby on Sunday so I managed to sneak by the shop on the way back from the pediatritians office. The went over all the controls and I had it shipped to my home. I snapped some pictures and figured I post it up.

It is a complete kit from Dave's Nitrous Outlet. The bracket is from Dyno tune so that I can still use my removeable top. Kit came with fuel pres. safety switch, digital rpm box with multi gear lockout, automatic bottle heater, nos filter, plate kit, big noids, blow down tube, nitrous pressure gauge, etc. The only option I didn't opt for was the bottle opener. More on the kit later. Here are some pics.

http://pic50.picturetrail.com/VOL431.../278147896.jpg
http://pic50.picturetrail.com/VOL431.../278147894.jpg
http://pic50.picturetrail.com/VOL431.../278147893.jpg
http://pic50.picturetrail.com/VOL431.../278147891.jpg
http://pic50.picturetrail.com/VOL431.../278147889.jpg
http://pic50.picturetrail.com/VOL431.../278147888.jpg
http://pic50.picturetrail.com/VOL431.../278147887.jpg
http://pic50.picturetrail.com/VOL431.../278147885.jpg
http://pic50.picturetrail.com/VOL431.../278147882.jpg
http://pic50.picturetrail.com/VOL431.../278147881.jpg
http://pic50.picturetrail.com/VOL431.../278147877.jpg

American Power 09-14-2007 07:33 PM

Nice job! I love a nice neat job. Especially the plate. Can I use that plate on an LS7?

What shot are you running?

gtodoug 09-14-2007 11:32 PM

I've hooked up a 50 shot for now so that I can monitor the fuel pressure. I don't know how much the stock pump will support. The car makes 515/465 on motor. I would love to spray the 200 shot, but we'll see how much the pump will take. Even with the 50 shot it's gotta be 560-570whp/550 wtq.

Sportsdude 09-15-2007 02:33 AM

How long does the bottle like that last? cost to refill? Congrats :thumbs: :cheers:

vegasredz062 09-15-2007 10:11 AM


Originally Posted by Sportsdude (Post 1561922711)
How long does the bottle like that last? cost to refill? Congrats :thumbs: :cheers:

That depends on how much juice you are running .. a 50 shot will last a long azz time .. i was running back then 150 and it ran out 6-7 full 1/4 mile passes ... to fill a 10 lb bottle cost me in vegas 38 dollars a refill

ILLSMOQ 09-15-2007 11:16 AM


Originally Posted by American Power (Post 1561918458)
Nice job! I love a nice neat job.


"neat" ? :leaving:

ILLSMOQ 09-16-2007 11:59 AM


Originally Posted by C666 (Post 1561925808)
You will love the Nitrous Outlet Plate kit, I added black lines from HSW

http://i167.photobucket.com/albums/u...0/DSCN1259.jpg
And this is a great little AF gauge if you dont have one not sure what they are showing in the pic but mine reads XX.X IE 11.4

http://i167.photobucket.com/albums/u...uare-large.jpg

Now that is "neat"

Where did you get that A/F gauge? I've seen it before but havn't had much luck finding it. Have a part number ?

Thanks:thumbs:

American Power 09-19-2007 07:19 PM


Originally Posted by ILLSMOQ (Post 1561924618)
"neat" ? :leaving:

Reffering to the plate instead of drilling a hole in the MAF and placing a fogger there...

Deserteagle83 05-12-2008 09:00 AM

Im really loving your install

xcessivex 05-12-2008 04:07 PM


Originally Posted by ILLSMOQ (Post 1561924618)
"neat" ? :leaving:

:withstupid:

Busa196 05-12-2008 09:37 PM


Originally Posted by ILLSMOQ (Post 1561924618)
"neat" ? :leaving:

Brutal.......:leaving:

2001 Red Coupe Bandit 07-10-2010 09:49 PM

Very nice!!! I have same bottle mount. Getting the plate right now to replace my TNT Power ring


All times are GMT -4. The time now is 12:19 PM.


© 2024 MH Sub I, LLC dba Internet Brands