John Hennessey
John H. Just got an 08 Viper, did you see the numbers it pulled on the dyno? WOW!!:eek:
chuck |
man that viper forum is slow !
|
From the Viper Forum:
Originally Posted by John Hennessey
i was guessing about 535 rw hp. i was low. this 2008 with factory advertised sae 600 hp with 12 miles made:
546 rw hp sae 516 rw torque sae needless to say these are very strong numbers for zero break in miles. i would expect a broken in motor to push 560 rw hp. that is nuts for bone stock! Pete, Dyno Dave Z., Herb and the rest of the SRT engineers delivered a very impressive power plant! |
Most would never mod that. (well, I did say most:D )
|
No offense Chuck but I think this one belongs in Off Topic. Has nothing directly too do with a Z06. Or are you comparing the hp of a viper to the hp of the Z? If so you should have stated that in the title somehow.
|
Originally Posted by Leo the Lion
(Post 1563072976)
No offense Chuck but I think this one belongs in Off Topic. Has nothing directly too do with a Z06. Or are you comparing the hp of a viper to the hp of the Z? If so you should have stated that in the title somehow.
|
OT or whatever -- I agree that the site is slow but the car put down some impressive numbers. :eek:
|
thats a whole lot of spuds for brand spanking new, and not alot of drive loss for a supposedly 600 crank rated power plant. Nice :thumbs:
|
Makes sense. I always said the Viper needs about 80hp more than the Z06 to be as fast. Nice numbers.
|
Originally Posted by 355Spider
(Post 1563077888)
Makes sense. I always said the Viper needs about 80hp more than the Z06 to be as fast. Nice numbers.
chuck |
Merge
|
All times are GMT -4. The time now is 04:36 AM. |
© 2024 MH Sub I, LLC dba Internet Brands