Mgw Shifter Fiiinnnaaallllyyyyyy Online!!!!
 

well guys i finally have our shifter online for ordering and also clear pics and specs. sorry for taking so long. here is the link....

http://www.mgwltd.com/corvette_short..._shifter.shtml


the shifters are also finally starting to ship out again and the new race knobs should be shipping next week!!!!!


regards
george

Hi George. I loved your shifters, as I have tried them on some Cobras. Have all of the issues with the shifter for the C6 been resolved (rattles, shifter coming apart during hard shifting, etc...)? I also remembered some issues with installing the shifter on the 08 C6?

Great shifter! I had one in my 98 Cobra when I had a T45. When I stepped up to a 26 spline T56 I bought another one. :D

When I book my flight to the Museum I'll be ordering another one for my C6 to install when I get home. :)

we had no issues with the 08 cars that i can recall. i have had my shifter on my personal 08 car for months now with no problems.
the issue with the rattling is basically due to the stock c6 knob and has been fixed with a bit of foam and rtv in the knob.

the issue with the shifter ball slipping was a VERY isolated issue with the dupont material not being hi-temp. this is a NON issue now.

regards
george

No issues here. This is an awesome shifter. Thanks George!:thumbs:

Doug:flag:

Hi George.

Love the shifter :thumbs:

Any update on the race knobs yet? Ordered one couple of weeks ago, can't wait to put it on

:cheers:

Larry

I ordered my shifter and race knob last week. Can't wait for it! :thumbs:

the molded grips should be here next week.


george

what does the race knob look like?

here is the prototype....


it will come in black or polished chrome accents with the polymer grip being black.


regards
george

Web site looks good!

I do have a couple questions, though. It looks like the threaded shaft is centered and the C6 shaft is offset. Is that correct? If so, how do they differ in the placement of the shift knob? Meaning, does the straight shaft place the shift knob further forward, or what?

The reason I ask is that I'd like to use a round aftermarket shift knob intended for C5s. Do you think this setup works out well with an '08 Z06?

I like that look a lot!!!!!

Awesome. I'm going to have to get this soon.

Hi George,

Great product! I'm considering your new short shifter for my '04 C5 which sees a lot of road course activity, and am waiting for your new race shifter knob in black. How do I place an order for the 25% vs. 35% short throw version on your website?

Thanks, Mike

if using the stock knob the height will be the same as stock? this is really important that it doesnt go higher

:iagree: Except its really important for me that it doesnt sit lower :rofl:

Does the knob sit about the same height as the stock one? or can you adjust the height? Looking to place an order very soon, just want to clear up everything before i get it! :thumbs:

hey george can you post up the tips to fix the rattling in the stock c6 knobs thanks

George,

If I go with the black race knob, is the shift pattern black too?

Since the 08's are already SHORT THROW from the factory,how much difference will there be with this one installed?Thanks.

i put mine in on wed. absolutely love it. no more rattle like the callaway and the shifter feels exactly how youd want it. great product:cheers: