![]() |
time to break up the 82 parts car
i've had this car for a couple months now, and its time to start breaking it up. at this time i'm only interested in doing local sales, with a handshake and cash. later on i'll do the whole shipping thing.
i'm keeping the bumper and glass tops and tranny, so thats not for sale, but 90% of what i have left needs to go (pretty much the whole car) i want to sell the seats and door panels as a set. the door panels are in great shape, and the leather on the seats is also in great shape, no rips or bad wear, a little dirty but much better than "average". the seat frames are a little banged up and i wouldent use them, but i figure that if your trying to freshen up an interior, you'll already have the seat frames anyways. i want 600 b.o. for 2 matching seats and 2 door panels. if you want the whole interior, i'd be happy to sell it, lets make a deal. the car is located in Newbury MA, about 30 mins north of boston. whatever you need, respond on here, and lets get this car broken up. thanks for reading -Sean http://img257.imageshack.us/img257/5323/interiorls1.jpg http://img502.imageshack.us/img502/4...terior2kt1.jpg http://img247.imageshack.us/img247/7180/diffkp4.jpg http://img108.imageshack.us/img108/1430/caryi0.jpg |
t-top interior trim piece
I'm interested in the interior t-top trim piece, the one with the hole for the courtesy light. Do you have it? If so PM me with picture and price, thanks.
|
how much for all 4 rear taillights?
|
i want the light cover thing that covers the bulb between the t tops and the power seat switch bezel
thanks |
corvette 1982
how much for the shift plate,-the e brake (red) rear cover-- and side (red)carpets thanks mark
|
how much for the dash if it has no cracks?
how much for all the parts needed to make a manual trans car into an auto trans car? not including the trans or shift plate thanks |
Does it have a working power antanna? if so how much? also i need the power window switches.
|
I'm interested in the plastic lens over the speedo and tach, but it must be in VG condition. Also, the plastic housing for the speed and tach. Mine are in good condition, but have cracks from overtightened screws. Let me know, thanks.
|
Ned parts for my 80
I need the linkage for the power door locks, I have an 80 and some of the linkage is missing. If you have it I will buy the complete set up for left and right doors. There are other parts that I may want. I work in Amesbury Ma. so I can pick up and pay cash. Please PM me or E-Mail me at jgulla@cabothouse.com
Thanks Joe. |
seats
|
Im intersted in the power mirror set up. Mirrors wiring harness and control switch in the center console. Also I would be interested in the shift plate and gauge bezels if the price is right and they are in good shape.
|
I would also like the heater control valve if its not rusted out.
|
i'm flattered that you guys all want me to ship parts all around the country...and i will keep all your spots when i'm ready to do the whole "shipping thing" but if you go back up and read carefully, i really only want to do local sales first give me a few weeks and i'll be ready to ship the stuff out, i'm just too busy right now to take on all that extra work.
joe-the power locks are actually one of the only things i was going to keep since my car is missing them, plus i'm not even sure if they work. but anything else you need just let me know and i'm sure we can work something out. as for anyone else who lives localy, or wants to drive to Newbury MA, if you need something we should be able to set a time within a day or so to make a swap. thank you. |
When you get down to the frame, I'd like the rear section behind the #4 body mounts. I'm in Jersey and will travel.
http://forums.corvetteforum.com/show....php?t=2020426 If those are power mirrors I'm interested. |
haha its gonna take a while to get down to the frame, but once i get to that point we'll work something out.
|
Originally Posted by Red 69
(Post 1565419135)
I'm interested in the plastic lens over the speedo and tach, but it must be in VG condition. Also, the plastic housing for the speed and tach. Mine are in good condition, but have cracks from overtightened screws. Let me know, thanks.
|
yea...you local?
|
trans x member
I'm looking for the trans x member-it.I'm doing a 700r4 swap to my 79...
47126 zip. Thanks,Craig |
crossmember is now in my 79...sorry i forgot to mention
|
:thumbs: IMDAWRLUS,
I'm local - I live in Rhode Island. Have you sold the sun visors yet? Better yet, let me ask what you have sold to date. It just might be worth the trip if you have some items I'm looking for. Let me know:thumbs: In fact, you're two hours away! Or should I say two hours if you drive 55mph (which, ahem, I don't)... |
All times are GMT -4. The time now is 12:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands