CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C3 General (https://www.corvetteforum.com/forums/c3-general-119/)
-   -   Please Review: Ten Rules For Buying Your First C3 Corvette (https://www.corvetteforum.com/forums/c3-general/2076877-please-review-ten-rules-for-buying-your-first-c3-corvette.html)

chstitans42 07-12-2008 11:28 PM

Please Review: Ten Rules For Buying Your First C3 Corvette
 
14 Attachment(s)
I have decided to take down my post ...

hammadown 07-12-2008 11:36 PM

Good list ...should help a few people :thumbs:

Hammadown :flag:

vettebuyer6369 07-13-2008 12:08 AM

On number 9, the "casting numbers on the block" are not compared to the VIN. The casting number for example could be for an "010" block, which could be for a C3, or a truck. There is no VIN comparison, nor is anything necessarily corfirmed.

The stamp pad VIN derivative on the block is what is compared to the VIN to see if the numbers match. The stamp pad suffix will also tell you if the motor is correct for the car's application.

If I were writing the list, I wouldn't say "write down the VIN and trim tag info," either. I would say, "bring a Black Book with you and check the correctness of the VIN, trim tag vs colors and engine data."

It's a good list for beginners.

LeMans Pete 07-13-2008 12:41 AM

I'd be a little surprised if a seller of a corvette would allow you to stab the frame of his corvette and possibly put a hole in it. I know I'd probably grab you by the seat of your pants and throw you out of my garage. There are many gaps in the frame that you can slip a finger up into and feel for either a build up of rust flakes, or a very solid piece of steel.

I like #8, and I think a quick way to tell if bubba has visited your C3 is by looking at the engine compartment. Lots of vacuum plugs? Twist ties? Crusted on oil? I think its so simple to just pop the hood, and can pretty much gauge the "bubba"ness from what that compartment looks like.

Also, I think its very, very important to set one of the most important goals early: custom or all original. I think this will drastically affect #4.

Good write up, wish I had it 10 years ago. :lol:

Steven_Belgium 07-13-2008 05:19 AM

For a newbie....this is very usefull & interesting !
Thanks a lot:thumbs:

BenUK 07-13-2008 06:40 AM


Originally Posted by chstitans42 (Post 1566280850)
Here are some pictures of what your frame SHOULD NOT look like:
http://i170.photobucket.com/albums/u...ns42/nono5.jpg

No $hiat :rofl: :rofl: :rofl: :rofl:

I like your checklist. Even if much of it should be common-sense stuff.

Wanna put a note on there about buying sight-unseen? People seem to do this and for some of us there's no choice, but you could help by suggesting which photos to ask for from the vendor to determine the condition of the car. :cheers:

chstitans42 07-13-2008 09:06 AM


Originally Posted by Vettebuyer5869 (Post 1566281299)
On number 9, the "casting numbers on the block" are not compared to the VIN. The casting number for example could be for an "010" block, which could be for a C3, or a truck. There is no VIN comparison, nor is anything necessarily corfirmed.

The stamp pad VIN derivative on the block is what is compared to the VIN to see if the numbers match. The stamp pad suffix will also tell you if the motor is correct for the car's application.

If I were writing the list, I wouldn't say "write down the VIN and trim tag info," either. I would say, "bring a Black Book with you and check the correctness of the VIN, trim tag vs colors and engine data."

It's a good list for beginners.

Added your input. This is the kind of feedback i wanted when i posted this. I just hope i can save some fellow future corvette owner from getting burned. I got lucky when i bought mine, but i know some others are less fourtunate.


Originally Posted by foxymophandlpapa (Post 1566281603)
I'd be a little surprised if a seller of a corvette would allow you to stab the frame of his corvette and possibly put a hole in it. I know I'd probably grab you by the seat of your pants and throw you out of my garage. There are many gaps in the frame that you can slip a finger up into and feel for either a build up of rust flakes, or a very solid piece of steel.

I like #8, and I think a quick way to tell if bubba has visited your C3 is by looking at the engine compartment. Lots of vacuum plugs? Twist ties? Crusted on oil? I think its so simple to just pop the hood, and can pretty much gauge the "bubba"ness from what that compartment looks like.

Also, I think its very, very important to set one of the most important goals early: custom or all original. I think this will drastically affect #4.

Good write up, wish I had it 10 years ago. :lol:

I guess you could use your knuckle... this is just what i have been told to do...Other suggestions?


Originally Posted by BenUK (Post 1566282600)
No $hiat :rofl: :rofl: :rofl: :rofl:

I like your checklist. Even if much of it should be common-sense stuff.

Wanna put a note on there about buying sight-unseen? People seem to do this and for some of us there's no choice, but you could help by suggesting which photos to ask for from the vendor to determine the condition of the car. :cheers:

Added that under rule number one:thumbs:

Thanks for your input guys, keep it coming

BenUK 07-13-2008 09:17 AM


Originally Posted by chstitans42 (Post 1566283225)
Added that under rule number one:thumbs:

Actually, what you've added wasn't what I was saying :rofl:

I live in the UK. If I want to buy a Vette from the US then I would consider buying unseen. For some of us there's no economical alternative.

What I was suggesting you could add was something like:

"If you must buy a Corvette without seeing it in person, these are the photos you need to demand from the vendor to get an idea of the condition of the car..."

:cheers:

chstitans42 07-13-2008 09:25 AM

lol i guess i mis read your post. tell me what you think now

400hp427vette 07-13-2008 11:59 AM

I purchased my car sight unseen, I did however get a classic car loan and with a lien securement comes a free inspection and report where most of the above are checked. Once the loan company (hagerty) approved the car. I made my decision to purchase. It's everything and more than reported. So if you are unable to see a car you can use that option. :cheers:

a560156 07-13-2008 12:08 PM

Agree it is a good list for beginners. I would add the obvious, but often overlooked fact, that you must make sure you have the necessarry funds available and that you have permission.

Alan 71 07-13-2008 12:12 PM

I think the list is very good. The pictures are very scary. I think you could add a note that says a car could have problems less severe than what you show but should still be walked away from.
Regards,
Alan

joshtried 07-13-2008 03:32 PM

how about if the seller is trying intentionally to rush the sell, you should probably walk away

DC3 07-13-2008 03:46 PM

You might mention something about checking the date of tires even if they look good.

This thread: http://forums.corvetteforum.com/show...light=tire+age

made me realize the tires on my recently acquired '73 are actually 11 years old even though they look brand new.

Old tires shouldn't keep anyone from buying an otherwise sound Vette but it would let you know what needs to be added to the priority list of things to do.

DC

msandym 07-13-2008 04:12 PM

please r
 
Excellent post ! I wish I read that BEFORE I bought my corvette .

Jeffery73 07-13-2008 05:09 PM

1 Attachment(s)
Great Post!

You might want to explain a little about the trim tag. Where it is located and what it tells you. It's an easy way to tell if it is the original paint color and interior. Here is a pic you can use if you would like.

Attachment 48163087

vwcorvette 07-13-2008 09:40 PM

I would add (from personal experience), "NEVER buy the first Corvette you ever look at." It's an emotional decision at that point and will lead you to some very skeptical decision making.

I'm gonna spend the rest of my life making Sasha what she should have been when I bought her. Oh well, could be worse. I could be driving and repairing a Mustang II!?!?!

vettebuyer6369 07-14-2008 12:17 AM

A couple more things:

-I wouldn't say ALWAYS replace the suspension. That's like saying you or your mechanic isn't smart enough to figure out if the springs are new. MOST times they need a suspension. Most often you assume you will need suspension work... but if the last few C2s and C3s I sold had the new owners replacing the suspension just because they ALWAYS do, they would have wasted thousands of dollars. I know this list is for the very newest of beginners, but this is too basic.

-I taught the "How to Buy Corvettes" class at Bloomington Gold for years and years. At the end, I always said, regardless of your expertise level in buying cars, whether it was your first or your 50th, ALWAYS bring someone with you.

The rookie desperately needs a mechanically-inclined or more importantly, a Corvette-experienced eye to tell them what they are looking at. The pro still needs to have a "second set of eyes" to pick up on stuff the buyer just might miss. Corvettes buyers are emotional animals, and quite often that split window gleaming in the sun just right or that perfect favorite color paint refects just right.... enough for you to miss the spliced section in the frame rail. Trust me... I've been buying Corvettes since the 70's and I always try to have another set of eyes with me whether its a proven Corvette friend or just a trusted ally like my wife who is smart enough to remind me, "don't get too excited just 'cause it's black."

Easy Mike 07-15-2008 08:55 AM

http://i106.photobucket.com/albums/m...ersGuide-1.jpg

It's all in here.

:)

AimHigh 07-15-2008 09:15 AM

Oh do you make me feel lucky! My car rocks and I had no idea until AFTER purchase of all the little things you make mention of as to what can eat your lunch and make you cry with these things. Luckily I'm solid.

If I had it to do over again I'd def want your guide!

You just forgot to mention one thing that most folks almost always do (if you mentioned and I just didn't read then I apologize),,,,

LEAVE YOUR EMOTIONS AT HOME! Don't go looking a buying on feeling (which is hard). Be objective 'cause there's lots of the C3s out there and always another pretty one around the corner,

just my two cents!


All times are GMT -4. The time now is 05:46 AM.


© 2024 MH Sub I, LLC dba Internet Brands