CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C6 Corvette ZR1 & Z06 (https://www.corvetteforum.com/forums/c6-corvette-zr1-and-z06-136/)
-   -   [Z06] low rpm miss (https://www.corvetteforum.com/forums/c6-corvette-zr1-and-z06/2205908-low-rpm-miss.html)

yolo300 12-15-2008 02:55 PM

low rpm miss
 
need help, I have a miss in the idle to 2000rpm range, lots of backpressure from exhaust, and no warranity as this was voided when I shipped the car to Australia. vehicle has about 6500 miles, this is the first problem since converting to righthand drive.any

chance it is the cats?

anyone ,please let me know what you can troble shoot for me

kind regards to all and agreat holiday as well

BubbaDuss 12-15-2008 03:06 PM

check the plugs and wires.

I had a cracked plug before, sounds similar

yolo300 12-17-2008 03:58 PM

anyone please help

patton 12-17-2008 04:04 PM

test equiptment...it will tell you whats up

BenThere 12-17-2008 06:33 PM

Doesn't look like there's a common problem here or someone would have posted by now. I doubt it's the cats. Plugs and wires as suggested would be a likely cause but with only 6500 miles, I would think someone would have had to do someting around there (colateral damage during the RH conversion?) and it might be visible. The thing is, there are so many things that can cause this stuff in electronics today that I think Patton has the best suggestion; get some diagnostics hooked up and see what they can tell you.

yolo300 12-18-2008 12:55 AM

All fixed, spark plug wire was connected with the boot,but short inside by about aquarter inch. pushed back together and no more miss

BenThere 12-18-2008 10:04 AM


Originally Posted by yolo300 (Post 1568239754)
All fixed, spark plug wire was connected with the boot,but short inside by about aquarter inch. pushed back together and no more miss

:hurray::hurray::hurray: Ya gotta love it when it's so easy!!!

Happy motoring!

BubbaDuss 12-18-2008 10:09 AM

+1 for me :-)

Have fun!!

BenThere 12-18-2008 10:20 AM


Originally Posted by BubbaDuss (Post 1568241719)
+1 for me :-)

Have fun!!

:thumbs:


All times are GMT -4. The time now is 11:54 AM.


© 2024 MH Sub I, LLC dba Internet Brands