|
For Sale Ls2 Engine complete
SOLD!!!!!!!!Removed Ls2 2007 C6 with 19,000 miles, CNC Ported 3X heads 64.5 cc
Stainless Valves, Comp cam 613 lift, 227 dur @ .050, 114 LSA 111 cl, 11.5 Cr. All engine covers, Intake Manifold with fuel rails and injectors, Oil pan, Harmonic Balancer, dip stick, water pump. Engine is out and ready for P/U or shipping!!!!! PM me for Pictures!!!! Pay-Pal accepted!! http://i301.photobucket.com/albums/n...341/Ls2003.jpg http://i301.photobucket.com/albums/n...341/Ls2008.jpg http://i301.photobucket.com/albums/n...341/Ls2009.jpg http://i301.photobucket.com/albums/n...341/Ls2010.jpg will also part out!!! 5,000.00 obo plus shipping. :thumbs:Phil |
rwhp numbers?
|
431 rwhp tru a 3.42 and A6, 3000 miles since the Head and cam install stock manifold, with Ported Fast 92 465 rwhp.
20 rear wheels Phil |
Bump
|
Btt
|
the engine will also include the water pump, sparkplugs.
this will be a drop in engine, minus the TB.:flag::flag::D |
see your pm, Ill take the spin
|
Originally Posted by blznsdl
(Post 1568881963)
see your pm, Ill take the spin
the Ported 92mm will be going on 427 build. it works really good. Phil:thumbs: |
acc on the front. clutch/flywheel?
|
Sorry, I need the acc for the 427, and its an A6
|
Guy's this is a Deal, the 3X heads are over 2000.00 alone, 431 rwhp tru an auto and 3.42's
that's almost 460 tru a manual trans. |
Btt
|
Do you have 1/4 mile times with that set up ?
Thanks ! |
No, I do not.
I have not been to the drags since 1985. but I'm going to PBIR saturday, I might run it, but without DR I wont have good 60ft times, but MPH should tell part of the story!!! |
Will be in Hollywood with a full sized suv the w/o march 14. If it is not sold by then pm me.
Live in Canada, take it home with me....along with a tan. good price, good luck. |
Ok, I'm still driving, I'm hoping to finish my 427 on Sunday, but I'll be waiting on
some new headers. thanks Phil |
Originally Posted by pmj341
(Post 1568926411)
No, I do not.
I have not been to the drags since 1985. but I'm going to PBIR saturday, I might run it, but without DR I wont have good 60ft times, but MPH should tell part of the story!!! good motor ,A6 and 3.42 thats what I would like to have as a set up. I`d like to buy your motor but you are too far away and my money (canadian)is no good... :( |
Originally Posted by pmj341
(Post 1568926411)
No, I do not.
I have not been to the drags since 1985. but I'm going to PBIR saturday, I might run it, but without DR I wont have good 60ft times, but MPH should tell part of the story!!! MPH tells most all, power wise. No doubt. Actually spinning radically off the line will give you the same or better MPH at the end of the quarter. Don't go beatin on her too much. ;) |
Maybe a little???
|
Went to the track, Palm Beach International Raceway, great track.
All concrete 1320ft. I decided not to run, I did not want to break something, i did put some VP fuel 5gals for the ride home and it made a noticeable difference, I ran it up on the way home. I'll be pulling the engine next week, and installing my new 427. |
| All times are GMT -4. The time now is 09:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands