CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C4 Tech/Performance (https://www.corvetteforum.com/forums/c4-tech-performance-48/)
-   -   SLP air intake install (https://www.corvetteforum.com/forums/c4-tech-performance/2379208-slp-air-intake-install.html)

Skip48 07-17-2009 02:20 PM

SLP air intake install
 
Has anyone installed the SLP Air intake package on a 94 or 95?
Was it difficult. How were your results. Don't know much about my car , only that I love to drive it. I just had Magnaflow cat-back installed and I want to increase airflow up front.

92ZR1WANNABE 07-17-2009 02:23 PM

If you mean the SLP Triple Claw intake , yes I installed one on my 92 in about 5 min.

SOTP Difference is minute if any, but it does look damn nice :)

runner140* 07-17-2009 03:16 PM


Originally Posted by Skip48 (Post 1570820913)
Has anyone installed the SLP Air intake package on a 94 or 95?
Was it difficult. How were your results. Don't know much about my car , only that I love to drive it. I just had Magnaflow cat-back installed and I want to increase airflow up front.

You mean these?http://i121.photobucket.com/albums/o...kow/62a1_1.jpg

Like was said above...five minutes.:thumbs:

aminnich 07-17-2009 03:20 PM


Originally Posted by 92ZR1WANNABE (Post 1570820946)
If you mean the SLP Triple Claw intake , yes I installed one on my 92 in about 5 min.

SOTP Difference is minute if any, but it does look damn nice :)

:iagree:


http://i51.photobucket.com/albums/f3...h/100_1069.jpg

Skip48 07-17-2009 04:45 PM

Thanks for info. Guess I'll attempt.

pologreen1 07-17-2009 04:51 PM

unsrew/ and unclamp your box from you intake tube, and put the clwa in its place.
5-10 minutes

ks5shooter 07-18-2009 09:15 AM


Originally Posted by pologreen1 (Post 1570822673)
unsrew/ and unclamp your box from you intake tube, and put the clwa in its place.
5-10 minutes

With box gone does dirty air get in and all over your engine compartment?Mine is very clean and want to try and keep it hat way.thanks :bigears

davetteguy 10-16-2009 07:57 AM

Im confused
 

Originally Posted by Skip48 (Post 1570822614)
Thanks for info. Guess I'll attempt.

I just received the claw from SLP and the install looks easy . However, I don not find a AIR supply hose on my LT1(1993) So i'm unsure what to do about the install as there is a hole for the hose in the SLP. Can someone advise me how to proceed

Thanks

-=Tom=- 10-16-2009 10:43 AM


Originally Posted by ks5shooter (Post 1570829319)
With box gone does dirty air get in and all over your engine compartment?Mine is very clean and want to try and keep it hat way.thanks :bigears

Not at all. I have the same SLP setup on my 95 and I don't notice any more dirt getting in there. I love how the claw looks too. :D

-=Tom=- 10-16-2009 10:45 AM


Originally Posted by davetteguy (Post 1571837821)
I just received the claw from SLP and the install looks easy . However, I don not find a AIR supply hose on my LT1(1993) So i'm unsure what to do about the install as there is a hole for the hose in the SLP. Can someone advise me how to proceed

Thanks

I don't think it'll make a difference as iirc it's just an air tube facing down. I'll go out and look at mine tonight to make sure though. I always thought it was for run off water from rain, etc.

littlesk8cracker 10-16-2009 10:56 AM

do you have to worry about any water from driving in rain, or washing car? looks like the filters could get wet pretty easily?

whitebrow 10-16-2009 04:36 PM

Any reason one of these guys wouldn't work on a 91 L98? Everywhere I see them listed for 92-96 but it looks to me like they have the very similar setup to my 91...

Not sure if its worth going with as opposed to a simple cut lid though. Or either at all.

Calderone 10-16-2009 07:37 PM

i would love to have this for my 87

uxb101 10-16-2009 09:10 PM


Originally Posted by davetteguy (Post 1571837821)
I just received the claw from SLP and the install looks easy . However, I don not find a AIR supply hose on my LT1(1993) So i'm unsure what to do about the install as there is a hole for the hose in the SLP. Can someone advise me how to proceed

Thanks

can you say OPTI SPARK :willy:

pianoguy 10-16-2009 09:32 PM


Originally Posted by davetteguy (Post 1571837821)
I just received the claw from SLP and the install looks easy . However, I don not find a AIR supply hose on my LT1(1993) So i'm unsure what to do about the install as there is a hole for the hose in the SLP. Can someone advise me how to proceed

Thanks

You can kinda see it in this picture - there should be a rubber hose that runs down to your AIR pump:

http://bradprestonmusic.com/Photos/V...s/dscn1048.jpg

Pwnage1337 10-16-2009 09:40 PM


Originally Posted by pianoguy (Post 1571845704)
You can kinda see it in this picture - there should be a rubber hose that runs down to your AIR pump:

http://bradprestonmusic.com/Photos/V...s/dscn1048.jpg

Can you say clean? holy ****!

pianoguy 10-16-2009 10:13 PM


Originally Posted by Pwnage1337 (Post 1571845809)
Can you say clean? holy ****!

Thanks much! It's a daily driver all summer, but I try to keep her looking good.

Aurora40 10-16-2009 10:29 PM


Originally Posted by davetteguy (Post 1571837821)
I just received the claw from SLP and the install looks easy . However, I don not find a AIR supply hose on my LT1(1993) So i'm unsure what to do about the install as there is a hole for the hose in the SLP. Can someone advise me how to proceed

Thanks

The kit should have come with a rubber cap for that tube if you don't have AIR, or the AIR doesn't draw from the airbox housing.

pologreen1 10-16-2009 10:34 PM


Originally Posted by whitebrow (Post 1571842897)
Any reason one of these guys wouldn't work on a 91 L98? Everywhere I see them listed for 92-96 but it looks to me like they have the very similar setup to my 91...

Not sure if its worth going with as opposed to a simple cut lid though. Or either at all.

90-96 have the same radiator design so it will work, in fact I have something similar mounted in my 90'
:thumbs:


All times are GMT -4. The time now is 10:08 PM.


© 2024 MH Sub I, LLC dba Internet Brands