Prices for 1 7/8
|
Price please...for a 97 both the 1 3/4 and 1 7/8
Thanks |
Prices for a 02 Z06 please.
|
PM's already swapped. Just subscribing and TTT for ya. :thumbs:
|
Originally Posted by Con Man
(Post 1573164545)
PM's already swapped. Just subscribing and TTT for ya. :thumbs:
|
prices for 02 ZO6 1 3/4 Please :cheers:
|
Price please...for a 97 both the 1 3/4 and 1 7/8. 02 Z.
|
Price on a 98.
|
Prices for both for an 02, And which set would be better for a stock motor?
|
price please, '03 z, 1-3/4"
|
Originally Posted by BADIC
(Post 1573161042)
price 02 Z
Originally Posted by SDLong329
(Post 1573162038)
I believe vendors are exempt of/from this policy ... for reasons noted by the retailer.
BTW - please PM me with pricing for 1.75" for 2001 C5 |
Originally Posted by Stomp'N'Go
(Post 1573163018)
Prices for 1 7/8
Originally Posted by coolbigj
(Post 1573163188)
Price please...for a 97 both the 1 3/4 and 1 7/8
Thanks
Originally Posted by mosimann
(Post 1573163854)
Prices for a 02 Z06 please.
Originally Posted by ZO6ED
(Post 1573167983)
prices for 02 ZO6 1 3/4 Please :cheers:
Originally Posted by RDnomorecobra
(Post 1573172011)
price please, '03 z, 1-3/4"
_____________________________________
Originally Posted by gamisou
(Post 1573171972)
Prices for both for an 02, And which set would be better for a stock motor?
Originally Posted by Con Man
(Post 1573164545)
PM's already swapped. Just subscribing and TTT for ya. :thumbs:
Originally Posted by kmagvette
(Post 1573171248)
Price please...for a 97 both the 1 3/4 and 1 7/8. 02 Z.
|
Price for an 02 please.
|
Originally Posted by Corvette_Rhett
(Post 1573175788)
Price for an 02 please.
|
Prices please for 2001, both 1 3/4" and 1 7/8" catted. What would be better for stock cubes, planning on heads and cam later wouldn't spin over 7.5K?
|
Prices for 1 7/8
|
Originally Posted by luckeman
(Post 1573177492)
Prices please for 2001, both 1 3/4" and 1 7/8" catted. What would be better for stock cubes, planning on heads and cam later wouldn't spin over 7.5K?
|
Originally Posted by luckeman
(Post 1573177492)
Prices please for 2001, both 1 3/4" and 1 7/8" catted. What would be better for stock cubes, planning on heads and cam later wouldn't spin over 7.5K?
Originally Posted by Tysonh
(Post 1573177517)
Prices for 1 7/8
|
TPSMak,
Thank you for sending the prices. I believe I have seen the other offers for the 'knock off' set up and I will have to say the price difference is significant. I am all for supporting the original designer and manufacturer of a product, however, when it comes down to a budget the cheaper route always initially appears easier for the pocket book. Please help convince me that LG is the way to go. Also, I would like some feedback from anyone else that has bought and installed the LG. Was it easy to install, hook up, did it line up correctly? I would be willing to spend the money if I am sure there would be no problems installing the system. |
If you're on a tight budget like me(22 and saving for a house) the "knock offs" are the way to go, but be prepared to make some adjustments to the fit as they arent the greatest quality.
However if you can come up with the extra cash, Im certain that quality headers like these would be a much easier install. The extra work Ive had to put in working out the bugs in my cheap system are worth the extra $500 or so, if I had it... Just my .02, If I find some extra $ I'd love to get a set of LGs to replace my cheapies :cheers: |
All times are GMT -4. The time now is 02:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands