|
Originally Posted by Corvette_Rhett
(Post 1573182644)
TPSMak,
Thank you for sending the prices. I believe I have seen the other offers for the 'knock off' set up and I will have to say the price difference is significant. I am all for supporting the original designer and manufacturer of a product, however, when it comes down to a budget the cheaper route always initially appears easier for the pocket book. Please help convince me that LG is the way to go. Also, I would like some feedback from anyone else that has bought and installed the LG. Was it easy to install, hook up, did it line up correctly? I would be willing to spend the money if I am sure there would be no problems installing the system. #1-Unlike a tunnel plate, headers takes quite awhile to develop and generally must be done with a vehicle where you can prototype on a car UNLESS you have extremely sophisticated software like what GM/ Ford has where they can design an entire car on the computer. I HIGHLY doubt some of these companies making knock offs are prototyping on actual cars.. if they did they would not have some of the install problems they have. I don't believe in supporting companies who BLATANTLY ripoff other people designs How would you feel if you designed a product and someone ripped it off and sold it alot cheaper to undercut you? #2-Fitment-From what we've seen from headers brought into our shop some of the knock offs end up taking longer to install and because of this we have to charge more to install the product. Which in turn will reduce some of the savings you will have between the LG and the knock off. The LG product installs very easily without having to do any unnecessary bending or cutting. #3-Customer Support-LG Motorsports has been around since 1988 DEVELOPING AND SUPPORTING the Corvette Community. Not many manufactures can say their products are tested as rigorously and extensively as LG's products. I can honestly say that LGs support for their products are excellent. They always answer the phones and always has a solution if their is a issue with their products, which has not happened much at all. #4-Supporting American Made Products-I have always tried to support my fellow Americans by trying to purchase products made in the US. Over the last 10 years this country has shipped jobs over seas at an alarming rate whether those are manufacturing jobs or even high paying tech jobs. I used to buy German cars(MB, BMW) but have decided to no longer do that.. my last 3 cars have been made by the GM or Ford. I understand not everyone has the ability to support their fellow Americans BUT when they lose their jobs because their job has been shipped overseas they'll have to look in the mirror as one of the causes as to why he or she lost their jobs. In the end if companies see that consumers are willing to support companies that want to knock off their properties there will be no incentives for them to develop and produce new products for the market. |
Prices please, 2003 Z06
|
Originally Posted by Dirtfall
(Post 1573185960)
Prices please, 2003 Z06
PM Sent :cheers::cheers: |
Great deal from a great Vendor :thumbs:
|
price please for '01
|
Prices for both sizes. I'm looking to go FI down the road so I'm looking at the 1 7/8 more.
|
LG 1 7/8's are available for the C5?
|
Originally Posted by igtabg1
(Post 1573190062)
price please for '01
Originally Posted by Chicago1
(Post 1573190978)
Prices for both sizes. I'm looking to go FI down the road so I'm looking at the 1 7/8 more.
Originally Posted by andrewjhaley
(Post 1573191279)
LG 1 7/8's are available for the C5?
|
can I get a price on 03 z06 1 7/8 please?
|
Originally Posted by 427t-top
(Post 1573191542)
can I get a price on 03 z06 1 7/8 please?
|
price for '99 C5
|
Now im confussed.... can you send me a price on what i need. I have a 99 vert i plan on in the future going with heads cam and a procharger posibly..
|
Originally Posted by TPSMak
(Post 1573184850)
Rhett,
#1-Unlike a tunnel plate, headers takes quite awhile to develop and generally must be done with a vehicle where you can prototype on a car UNLESS you have extremely sophisticated software like what GM/ Ford has where they can design an entire car on the computer. I HIGHLY doubt some of these companies making knock offs are prototyping on actual cars.. if they did they would not have some of the install problems they have. I don't believe in supporting companies who BLATANTLY ripoff other people designs How would you feel if you designed a product and someone ripped it off and sold it alot cheaper to undercut you? #2-Fitment-From what we've seen from headers brought into our shop some of the knock offs end up taking longer to install and because of this we have to charge more to install the product. Which in turn will reduce some of the savings you will have between the LG and the knock off. The LG product installs very easily without having to do any unnecessary bending or cutting. #3-Customer Support-LG Motorsports has been around since 1988 DEVELOPING AND SUPPORTING the Corvette Community. Not many manufactures can say their products are tested as rigorously and extensively as LG's products. I can honestly say that LGs support for their products are excellent. They always answer the phones and always has a solution if their is a issue with their products, which has not happened much at all. #4-Supporting American Made Products-I have always tried to support my fellow Americans by trying to purchase products made in the US. Over the last 10 years this country has shipped jobs over seas at an alarming rate whether those are manufacturing jobs or even high paying tech jobs. I used to buy German cars(MB, BMW) but have decided to no longer do that.. my last 3 cars have been made by the GM or Ford. I understand not everyone has the ability to support their fellow Americans BUT when they lose their jobs because their job has been shipped overseas they'll have to look in the mirror as one of the causes as to why he or she lost their jobs. In the end if companies see that consumers are willing to support companies that want to knock off their properties there will be no incentives for them to develop and produce new products for the market. |
Originally Posted by M3MOTORSPORTS
(Post 1573193771)
price for '99 C5
Originally Posted by krzytrain
(Post 1573194366)
Now im confussed.... can you send me a price on what i need. I have a 99 vert i plan on in the future going with heads cam and a procharger posibly..
Originally Posted by Corvette_Rhett
(Post 1573195372)
Thanks for the thorough answer. If I can find the money I will buy from you. Good luck with the sales.
|
Would love a price to 08244
|
pm with price for 2001 z06..thx
|
price to 03037, 2002 z06
|
Price for the 1 7/8 for a C5 Z06 to 32542
|
Originally Posted by Targa98
(Post 1573205568)
Would love a price to 08244
Originally Posted by c6z06forme10
(Post 1573525415)
Price for the 1 7/8 for a C5 Z06 to 32542
Originally Posted by Psiadd1ct
(Post 1573524179)
price to 03037, 2002 z06
Originally Posted by TPSMak
(Post 1573195859)
PM Sent
If you are thinking of going with a Supercharger I would go with 1-8/8" No problem Rhett... :thumbs:
Originally Posted by tcrcuda5
(Post 1573523845)
pm with price for 2001 z06..thx
|
Price for a 2000 please. Thanks!
|
| All times are GMT -4. The time now is 05:05 AM. |
© 2024 MH Sub I, LLC dba Internet Brands