CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C3s for Sale/Wanted (https://www.corvetteforum.com/forums/c3s-for-sale-wanted-56/)
-   -   1969 Corvette 350/415 HP 4-Speed for sale - Clean and Awesome! (https://www.corvetteforum.com/forums/c3s-for-sale-wanted/2531800-1969-corvette-350-415-hp-4-speed-for-sale-clean-and-awesome.html)

MS69 350/4-speed 02-19-2010 12:29 AM

1969 # Matching Corvette 350/350 4-Speed for sale $29,995
 
CAR IS STILL FOR SALE:

1969 # Matching - Corvette 350 4-speed for sale!

http://www.gearheadsdesign.com/1969c...e/DSCF5727.JPG

I truely love this vette...I do not need to sell her but I have two small children that want to go with Dad to car shows and a Vette unfortunately does not accomidate more than two! So I'm looking to replace my vette to get a 69 Camaro with a back seat and plus my garage only has room for one toy! And my wife does not want me to become Jay Leno and have a collection of these cool muscle Cars...Wifes...

1969 CHEVROLET CORVETTE COUPE
Matching Numbers Original - 350/350hp (4 Speed). 1969 Corvette Stingray Coupe. The most desirable year of all C3 bumper Vettes when muscle cars still had horsepower and plenty of it! Before the Gas Shortage of the '70s this true muscle car Corvette was optioned with the High Performance Package 350 with 350hp, M21 Muncie 4 Speed, also with the rare factory optioned 4,11 rear end gears High Performance Package. The car is a No hit, 3 owner car that has always been someone's pride and joy, first owner had it until 1987 and the second owner sold it in 2007. Car had a body-on restoration performed in early 2007. The Engine is the Original Matching Numbers 350. It retains the original 2.02 Double camel hump heads but the engine when rebuilt has had some slight performance enhancements such as screw in studs guide plates, Roller Rockers, the Cam is a period correct LT1 Solid lift camshaft. The intake is an Edelbrock Torker II and it is topped off with a Holley 650 Double Pump Carburetor. It has a desirable close ratio Hurst shifter. The exhaust was just replaced approx. 300 miles ago. It now has Hedman Ceramic Coated Long Tube Headers running through 2.5 Pipes through Flowmaster Mufflers! Car sounds Awesome with loads of Growl and Rumble! The ignition was updated to a new HEI electroninc ignition with the addition of a MSD 6AL with rev limiter. The new distributor is a Corvette tach drive to allow the original tachometer to work perfectly! The car is extremely fast, It is estimated to run in the 12's in the quarter mile! A True Time Machine that gives you a true appreciation of what a true GM muscle car was. These '69 Vettes are getting harder and harder to find with great frames and If you want a super clean Corvette that is ready to go that draws a crowd anywhere you go...This is the Vette. All the accessories you would buy for this Vette I already have and they come with the vette! Corvette comes with a Wolf Custom Fitted Car Cover, 1969 Corvette Assembly Manual, C3 T-Top Carrying Case to store and protect your tops when your enjoying the weather, Also included is A C3 Custom fitted fender Gripper. Custom posters of this Vette will be provided to you as well on a CD-ROM.

More Pics and Video Click This Link:
http://www.gearheadsdesign.com/1969corvette/

Price - $29,995 OBO - Will Consider trades.

419-306-8669 OWENSVILLE, OH

sales@gearheadsdesign.com

ZBRA 02-19-2010 02:33 AM

Beautiful! :thumbs:

hsaarch 02-19-2010 08:44 AM

Stunning!:thumbs: Wish I had the cash...would you be willing to drop the price $20,000???? Kidding!!!!! Good luck with the sale!

tompugh 02-19-2010 10:11 AM


Originally Posted by MS69 350/4-speed (Post 1573151659)
1969 Corvette 350 4-speed for sale!

I truely love this vette...I do not need to sell but I'm looking to get a 69 Camaro and only have room for one toy...! Wifes....

For all the details click this link:

http://www.holtautosales.com/slone/

Price 37,000 Firm.

Serious inquires only please!

sales@gearheadsdesign.com

Pretty car, I see lots of TLC in that one. This will be a good market test. Good luck.

DCLINE 02-19-2010 01:10 PM

Wow!!!!!!!!!!!!!!!!!

Mark Battersby 02-19-2010 01:26 PM

Awesome.... credit to the owner.

Good luck with the sale - there is a lucky new corvette owner just waiting..

1980ZZ4 02-19-2010 02:30 PM


Originally Posted by MS69 350/4-speed (Post 1573151659)
1969 Corvette 350 4-speed for sale!

I truely love this vette...I do not need to sell but I'm looking to get a 69 Camaro and only have room for one toy...! Wifes....

For all the details click this link:

http://www.holtautosales.com/slone/

Price 37,000 Firm.

Serious inquires only please!

sales@gearheadsdesign.com


That is a spectacular car. You know that you'll regret the sale one day, right? If I had the funds, I'd take it off your hands.

MS69 350/4-speed 02-19-2010 05:19 PM


Originally Posted by 1980ZZ4 (Post 1573156901)
That is a spectacular car. You know that you'll regret the sale one day, right? If I had the funds, I'd take it off your hands.

Yea I know in 10 years I will kick myself... The Problem I have is I want to get a 69 Camaro I can mod up to 600HP and not hurt the value... The vette is awesome but I'm at the limit I can do with it with out hurting the value! It has been a sweet toy for the last few years! And draws lots of attention at shows... I'm just ready to enjoy a different muscle car! Trust me I know how hard it is to find a vette in this condition with all the Frame and water issues these vettes had... And as tight and nice as my vette is I will defiantely cry when a truck shows up to get the vette... Whoever buys it I will keep in contact with and get 1st dibs if they ever sell it!!!!

Here is a video of the Corvette:

http://www.youtube.com/user/michaels.../7/wC-oqt0OfZs

OH and I forgot to mention I just put new tires on the vette, BF goodwrench Radail TAs all around... 15 miles... just drove it home from the shop. I also have the original Valve covers. Car comes with the Wolf Car cover and the custom fitted Engine bay fender cover!

68ragtop69 02-19-2010 10:44 PM

Bump....for a great looking car!!! Good Luck!!

Steeler 02-20-2010 05:04 PM

Man What A Neat Car
 
Hi
:iagree:That car is sooooooo good and a credit to you!
If only it was closer to OZ, but I can dream.:thumbs:

Tx_Vette 02-20-2010 11:09 PM

Bump!

shank0668 02-21-2010 12:32 AM

Great car, where did you get that front end work cover? Good luck with the sale.

MS69 350/4-speed 02-23-2010 03:38 PM


Originally Posted by shank0668 (Post 1573173694)
Great car, where did you get that front end work cover? Good luck with the sale.

I believe the fender cover was from ZIP Products!

jimo 02-23-2010 09:56 PM

very nice :thumbs: good luck withthe sale

shamby 02-24-2010 07:02 PM

Good looking car. Here's a bump for ya, Good luck with the sale

lockmart 02-25-2010 08:17 PM

Awesome car!

SGAL1 02-27-2010 07:41 PM


Originally Posted by DCLINE (Post 1573156006)
Wow!!!!!!!!!!!!!!!!!

I second that.....Wow!!! :thumbs:

MS69 350/4-speed 02-28-2010 01:35 AM

If anyone wants to see her run and take a video ride in the car to listen to me run thtough the gears.

here you go:

http://www.youtube.com/watch?v=S3HHFlj48BU

Mark Battersby 02-28-2010 01:39 AM


Originally Posted by MS69 350/4-speed (Post 1573255427)
If anyone wants to see her run and take a video ride in the car to listen to me run thtough the gears.

here you go:

http://www.youtube.com/watch?v=S3HHFlj48BU

Super :thumbs::thumbs::thumbs::thumbs::thumbs: :thumbs:

jr9170 02-28-2010 01:48 AM

Beautiful looking 69...:thumbs:


All times are GMT -4. The time now is 09:19 AM.


© 2024 MH Sub I, LLC dba Internet Brands