|
•► ► Corvettes of Westchester - is not just C5 & C6s ◄ ◄•
CORVETTES of WESTCHESTER http://www.corvettes-of-westchester....D%20BANNER.gif http://www.automobiliausa.com/images...go_C-4_523.jpg is NOT just for C5 and C6 CORVETTES Hey there C4 guys.... I saw a fella on the forum today looking for a place in NY/Northern NJ to service his C4. A few customers chimed in, but something disturbed me. Someone said that we ONLY serviced C5 and C6 cars. YOU'RE KIDDING RIGHT? I've been servicing C4 Corvettes for over 20 years. It's my own fault for not posting often in the C4 sections, but I never thought I had to cause we already service tons of C4 and earlier Corvettes. We actually have 3 or 4 C4's here today including one ZR1. Just so that everyone is aware, We do EVERYTHING except paint...And, I can refer you to the best guy in the area if you need body services. http://www.corvettes-of-westchester....r4%20photo.jpg Some of the popular C4 services we offer are... ENGINE BUILDING / MODS EXHAUST SUSPENSION BRAKES INTERIOR WHEELS/TIRES ABS SERVICE and DIAGNOSTICS AIR CONDITIONING CUSTOM BUILT AUTOMATIC TRANSMISSIONS REAR DIFFERENTIAL REBUILD SERVICE PRO TORQUE stall converters CUSTOM BURNED CHIPS LT1 COMPUTER RE-FLASHES HEADLIGHT DOOR/MOTOR REPAIR ELECTRICAL DIAGNOSTICS even OIL CHANGES / TRANSMISSION services. ---------------------------------------------------- http://www.corvettes-of-westchester....RGE%20LOGO.gif http://www.corvettes-of-westchester....0converter.jpg http://www.torridmedia.com/gui/scree...rge_moates.jpg We have all of the GM SERVICE MANUALS, TECH1 and TECH 2 scan tools, ABS DIAGNOSTICS, KENT MOORE TOOLS, Chip Burners and LT1 reflashing software. Corvettes of Westchester is a huge shop of over 5,000 square feet with 7 automotive lifts, waiting room/showroom, and Arcade Games for those waiting for service! If you've never checked us out before, or thought we didn't service C4's...You should come and see us. We're open 6 days a week 8am to 10pm and later when necessary. Located in OSSINING, N.Y. just off rt.9 & 9A near the Croton train station about 10 mins from the TAPPAN ZEE BRIDGE. We're EVERYTHING except paint! Call us any time. Chuck CoW |
glad to hear someone sticking with us :thumbs:
|
Dude....I've always worked on C4s.....
Originally Posted by BrianCunningham
(Post 1573283100)
glad to hear someone sticking with us :thumbs:
We get lots of em in here so I never even thought about advertising. We've had a few ZR1s come by in the past few years and we do tons of engine and trans work on these cars now that they're older. Call us any time! Chuck CoW |
I t's a little far from Abilene Tx to come up there. I did enjoy talking to you when you came to Abilene, you gave me some good C4 advice. You also made the C5 run unbelieably better. Traded that car for a C6 so we need to get with you sometime. Do you have plans to come to Texas anytime, I would really like to talk to you about some changes on a C4.
|
Nice stuff.
|
Possibly VERY soon!
Originally Posted by 88yellow
(Post 1573290027)
I t's a little far from Abilene Tx to come up there. I did enjoy talking to you when you came to Abilene, you gave me some good C4 advice. You also made the C5 run unbelieably better. Traded that car for a C6 so we need to get with you sometime. Do you have plans to come to Texas anytime, I would really like to talk to you about some changes on a C4.
Keep Watch! Chuck CoW |
| All times are GMT -4. The time now is 11:09 AM. |
© 2024 MH Sub I, LLC dba Internet Brands