FS: Trailing Arms
 

Sandblasted/powdercoated, new poly bushings, straight, new studs. The only reason I didn't use them was because there was a little bit of play in the ends of the trailing arms, where the bushing cups press in...and I upgraded to offset arms.

$90 US for the pair + shipping.

http://i6.photobucket.com/albums/y23...s/DSC07880.jpg

Could you please explain how loose the bushings are. Are they loose because the bushing is the poly type and not OEM or because the metal around the bushing is deformed or thin.Are the bushings loose pressed in. Are both arms loose. Any repairs to the arms.In your opinion do you know what will correct them.
Thanks,
Wes

Here is the post I made on it a long time ago...

http://forums.corvetteforum.com/c3-g...ration-11.html

I am an OCD freak. These arms are in perfect condition, the bushing cups that press into the arms weren't a press fit...they just slipped in with the slight push of the palm of my hand. the main reason for switching was because I really wanted those offset arms...otherwise I would have tack welded those cups in place for extra insurance, and run them on the car.

still have them? how much shipping to 40165 thanks Tim

I 'll take em if they are still available. Ship to 15236. Give me a phone # and lets make arrangements

Sold.