CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C6 Corvette General Discussion (https://www.corvetteforum.com/forums/c6-corvette-general-discussion-74/)
-   -   ****New Carbon Fiber Mirror Covers**** (https://www.corvetteforum.com/forums/c6-corvette-general-discussion/2694965-new-carbon-fiber-mirror-covers.html)

American Hydrocarbon 10-04-2010 08:53 PM

****New Carbon Fiber Mirror Covers****
 
Just released our new C5 Carbon Fiber Mirror Covers. These are made by hand right here in the USA. These attach with double sided tape and fit very well.
These will list for $289.95 a pair but the forum special good until December 31st is $250.00 a pair shipped to the lower 48. Canadian orders must call me first.
Click here to order yours: https://www.paypal.com/cgi-bin/websc...=VUA3E2QBUY2DU

http://i202.photobucket.com/albums/a...11AAA063-1.jpg

mcandrew67 10-04-2010 08:55 PM

Do you have a picture of what they look like from the other side? I'd like to see how tight they look and if they look like a stick on.
:cheers:David

American Hydrocarbon 10-04-2010 08:57 PM


Originally Posted by mcandrew67 (Post 1575524309)
Do you have a picture of what they look like from the other side? I'd like to see how tight they look and if they look like a stick on.
:cheers:David

I'll get some more pics posted later in the week.:thumbs:

Mardis Gras 10-04-2010 08:59 PM

:lurk:

mcandrew67 10-04-2010 09:20 PM


Originally Posted by flasunshine1 (Post 1575524339)
I'll get some more pics posted later in the week.:thumbs:

:thumbs:Ok, Will wait for pics, If they look good I'll take a set
:cheers:

laconiajack 10-04-2010 09:26 PM

So, C5 and C6 outside rearview mirrors are identical? I didn't know that.

One Bad Vette 10-07-2010 02:32 PM


Originally Posted by mcandrew67 (Post 1575524589)
:thumbs:Ok, Will wait for pics, If they look good I'll take a set
:cheers:

:iagree: :thumbs:

SilverScorp 10-07-2010 06:07 PM

Im a little skeptical about the way they look from the front or else there would be a picture already. Not really sure why it would take time to post front pics. I am really hoping these look good from the front because I would certainly get a pair if the look is clean and doesnt retain water inbetween the two layers. :lurk:

mcandrew67 10-07-2010 06:28 PM


Originally Posted by SilverScorp (Post 1575553940)
Im a little skeptical about the way they look from the front or else there would be a picture already. Not really sure why it would take time to post front pics. I am really hoping these look good from the front because I would certainly get a pair if the look is clean and doesnt retain water inbetween the two layers. :lurk:

and, I'm thinking it has to be a two part piece, or how else will it fit over and around the main piece out off the door?
I would like a pic of the cover how it comes, instructions and a pic of it from the mirror side.

:smash::D

mcandrew67 10-08-2010 06:58 PM

TTT for an Update... some of us are interested and just waiting on you......:D

AORoads 10-08-2010 07:05 PM

:lurk: how long does it take to develop a digital picture?

wolfdogs 10-09-2010 09:26 AM

other side pictures please......... thanks :thumbs::cheers:

speedraider 10-09-2010 10:38 AM


Originally Posted by mcandrew67 (Post 1575554138)
and, I'm thinking it has to be a two part piece, or how else will it fit over and around the main piece out off the door?
I would like a pic of the cover how it comes, instructions and a pic of it from the mirror side.

:smash::D

:iagree:

mcandrew67 10-09-2010 10:45 AM

Ya know it really Irks me with vendors that start a thread, don't follow up, don't give you all the info a "reasonable" customer would ask. I am no longer interested in your covers, good luck in your business.

American Hydrocarbon 10-11-2010 09:06 PM


Originally Posted by mcandrew67 (Post 1575554138)
and, I'm thinking it has to be a two part piece, or how else will it fit over and around the main piece out off the door?
I would like a pic of the cover how it comes, instructions and a pic of it from the mirror side.

:smash::D

Patience my fellow forum members;)
They come like this:
http://i202.photobucket.com/albums/a...IMG_3294-1.jpg
They attach with double sided tape. After you position them pull the tape and massage them into place. Five minute install.
http://i202.photobucket.com/albums/a...DriverSide.jpg
http://i202.photobucket.com/albums/a...sengerSide.jpg
If you want to see them in person come to the Premium show (SW Florida Corvette Club) on the 30th in Ft. Myers.

American Hydrocarbon 10-11-2010 09:09 PM


Originally Posted by laconiajack (Post 1575524664)
So, C5 and C6 outside rearview mirrors are identical? I didn't know that.

No, these are for the C5 only. The GM engineers changed the shape on the window side to be more square so I have to make new molds for the C6. ughhhhhhhh

The C5 and C6 look the same but up close, not the same.

keyplyr 10-11-2010 09:15 PM


Originally Posted by flasunshine1 (Post 1575591751)
No, these are for the C5 only. The GM engineers changed the shape on the window side to be more square so I have to make new molds for the C6. ughhhhhhhh

The C5 and C6 look the same but up close, not the same.

I guess I got confused because these covers are for C5 but you posted them in the C6 General discussion forum.




American Hydrocarbon 10-12-2010 10:03 AM

I did not realize they do not fit the C6. A soon as we get a set of C6 mirrors we will make them. Me bad.

Originally Posted by keyplyr (Post 1575591822)
I guess I got confused because these covers are for C5 but you posted them in the C6 General discussion forum.




SilverScorp 10-17-2010 12:14 AM

Cool beans. While your at it, make a matching piece that wraps around the post from the door to the mirror for congruency. Really looking forward to this piece man! :thumbs:

widgetsupply 10-17-2010 01:19 AM

I don't understand the point of these. Purely cosmetic?


All times are GMT -4. The time now is 11:54 AM.


© 2024 MH Sub I, LLC dba Internet Brands