New MadVette C5 Corner Cubby Sub Boxes
 

Just thought I'd let you guys know these are available.

Here is the thread with pics and a link to them in my store. :thumbs:

CLICK HERE!!!

:thumbs::thumbs::thumbs:

This product is a great idea! I just want to emphasize something you guys state on your website:

"Polyfill can be added to the box to accommodate larger airspace specs."

Yes, absolutely. With a box this small, pretty much any serious sub will benefit from polyfill.

I agree. Thanks! :)

ttt :cheers:

ttt :cheers:

hmmm .55 is just about right for an image dynamics sub.
:reddevil:

Hmm... yep, it sounds great with ID 8's or 10's... just finished up an entire ID setup in a Vette in FL. 8's sounded awesome!!! :cheers:

ttt :cheers:

Will an IDQ10 fit?.... I was told that IDQ10 is more like an 11"....
Also.. that the mounting depth maybe an issue.

Sorry for all the questions regarding your box, but I am really close to pulling the trigger, but I need to know it will work with the sub & amp combo I am wanting to put in the car.

No worries on the questions. :) I want you to be happy with the final product. :thumbs:

Yes, an IDQ10V3 will work in that enclosure. I have this exact same subwoofer, and made sure to accommodate the new box style to work with that sub, as I like ID equipment personally. I am quite confident you will enjoy the nice, smooth, and exact sound it gives being in this box. :cheers:

What amp are you considering using on the IDQ10 subs?

ttt :cheers:

ttt :cheers:

Depends which one getting ready to order IDQ 10 V3D4 and it would be happy in .75 to 1.0

I was going to use a soundstream REF1.500

.75 to 1.0 cubic ft. is ideal for that sub, but from experience, I know it sounds good in a .55cf box, as Kale mentioned, and I put a little of polyfill in to smooth out the overall sound. It is tight and responsive. :thumbs:

That would work well. On Barry's setup, we had a Memphis Belle, with 1100 watts going to the 2 M3 10's (500 watts each), and they sounded great!! :cheers:

These are lighter then the normal middle boxes?

Yes, that is correct. The middle well boxes are made from MDF entirely, and the corner cubby boxes I make are and MDF base, and hand laid fiberglass. Each enclosure weighs in at about 5 lbs. each, without a sub. :thumbs: