CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C5 General (https://www.corvetteforum.com/forums/c5-general-103/)
-   -   New! C5 Corvette 3pc Lower Spoiler Reinforcement Kit! Lower Rub Strips (https://www.corvetteforum.com/forums/c5-general/2771376-new-c5-corvette-3pc-lower-spoiler-reinforcement-kit-lower-rub-strips.html)

RPI Designs 02-04-2011 07:04 PM

New! C5 Corvette 3pc Lower Spoiler Reinforcement Kit! Lower Rub Strips
 
C5 Corvette Lower Front Spoiler Replacement Kit

These C5 Corvette Front Spoilers in urethane give your Corvette a factory-fresh appearance and restore proper air flow through your radiator, solving many cooling problems. Our C5 Corvette Front Spoilers mount in the factory locations. You can use your original hardware but if it is missing or damaged you can add a hardware kit.

Your 3-piece spoiler's center piece is spring-loaded and can bounce right back in place, however, the left and right sections are not, which means they could rip off altogether if you hit a bumper block or curb. To alleviate this, we introduce the Corvette Spoiler Reinforcement Kit. These black, ABS plastic brackets take the brunt of a bump and prevent bolts from sliding through, keeping your spoiler securely in place. Kit includes one left and one right bracket and installs easily using existing fasteners.

This spoiler kit will fit 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 C5 Corvette, including base, coupe, convertible and Z06.

Normal price: $100.00
Sale price: $94.95
Forum price: $85.46 (enter coupon code SS2007 at checkout)

Available here: http://rpidesigns.com/shop/item.aspx?itemid=1905

http://rpidesigns.com/images/c53pcspl.jpg

Thanks!!

:thumbs:

DP77Vette 02-04-2011 07:52 PM

So what's the difference in yours and factory? Or am I missing something?

$$$frumnuttin' 02-04-2011 08:00 PM

http://i104.photobucket.com/albums/m...lkingabout.jpg

RPI Designs 02-04-2011 10:49 PM


Originally Posted by DP77Vette (Post 1576706400)
So what's the difference in yours and factory? Or am I missing something?

Factory are no longer available. These wear out and can be trouble. That is why we offer a brand new one for guys who want to protect like new.

RPI Designs 02-06-2011 08:07 PM

:cheers:

swpowell 02-08-2011 05:56 AM

Does this come with installation instructions. When I bought my vette the middle piece of the spoiler was damaged and put back on with zip ties. Pretty sure it was not assembled that way at the factory.

MSG C5 02-08-2011 09:05 AM


Originally Posted by swpowell (Post 1576734584)
Does this come with installation instructions. When I bought my vette the middle piece of the spoiler was damaged and put back on with zip ties. Pretty sure it was not assembled that way at the factory.

Pretty easy install. Just unscrew the existing spoiler and install the new one. If you have zip ties holding your current spoiler on, you might consider getting an extra hardware kit as you probably need to replace the screws.

Pretty sad that GM has already discontinued making an OEM replacement for a part that needs to be replaced due to wear & tear only 7 years after the model run ends.

swpowell 02-21-2011 08:36 PM

Are these still for sale at the discount price?

FiberglassFan 02-22-2011 04:26 AM


Originally Posted by RPI Designs (Post 1576707815)
Factory are no longer available. These wear out and can be trouble. That is why we offer a brand new one for guys who want to protect like new.

:ack: Bad news about factory parts!!!:ack:

Thanks for stepping in with with a nice reproduction.:thumbs::thumbs::thumbs:... I'll save your data and be in touch when the time comes again....Already replaced the OEM parts 2 times center and 3 times sides. LOTs of daily driving on mine...

RPI Designs 02-23-2011 12:35 PM

Thanks!!

RPI Designs 02-28-2011 06:05 PM

Thanks for the orders!

doje 02-28-2011 06:28 PM

I just installed a new factory set (been sitting in the garage in a box for years), but I would like your reinforcement kit. Any chance it can be purchased seperately? Price?

RPI Designs 03-02-2011 07:03 PM


Originally Posted by doje (Post 1576923676)
I just installed a new factory set (been sitting in the garage in a box for years), but I would like your reinforcement kit. Any chance it can be purchased seperately? Price?


I'll check that for you, thanks!!

doje 03-11-2011 06:41 PM


Originally Posted by doje (Post 1576923676)
I just installed a new factory set (been sitting in the garage in a box for years), but I would like your reinforcement kit. Any chance it can be purchased seperately? Price?


Originally Posted by RPI Designs (Post 1576943576)
I'll check that for you, thanks!!

:lurk:

RPI Designs 03-13-2011 10:35 PM


Originally Posted by doje (Post 1577029852)
:lurk:

Sorry, couldn't find a partial kit.

RPI Designs 06-04-2011 10:10 PM

:cheers:

DVRider 06-05-2011 12:07 AM

Got me one. Thanks :thumbs:

RPI Designs 06-11-2011 09:12 PM


Originally Posted by DVRider (Post 1577795135)
Got me one. Thanks :thumbs:

:thumbs:

pewter99 06-11-2011 09:14 PM

for the benefit of those who simply feel the need to reply....

Interference in a For Sale thread
If you don’t like the price or item being offered in for sale thread, take it to e-mail or PMs. Better still, just move on to a thread that is offering something you like the price on.

If you post a criticism of the price or the quality of the item being offered, you will be in violation of Forum rules and subject to sanctions.

If you post your own for sale items to the for sale thread started by someone else, you also are in violation of Forum rules. Start your own thread, rather than jumping into the thread of someone else.

If your contribution to a for sale thread does not advance the sale, you are in the way.

mobman 01-21-2012 07:20 PM

Just Ordered one. Thanks, I needed that!


All times are GMT -4. The time now is 11:59 PM.


© 2024 MH Sub I, LLC dba Internet Brands