***RSD NHRA Legal Roll Bar***
 

http://i273.photobucket.com/albums/j...s/PA150372.jpg

We have them in stock and ready to ship to you. They install in just a few hours in your garage or driveway, no lift required. You don't even have to remove the seats!! They come with all the hardware needed to install, and included is a complete instruction manual with pictures.

http://i273.photobucket.com/albums/j...s/PA310387.jpg

Also available in 6 point W/Passenger door bar

http://i273.photobucket.com/albums/j...s/P9040346.jpg

Buy them here for Just $1,150!! plus Shipping

http://www.racespecialtydesigns.com/product.php?productid=125&cat=85&page=1

Steve@RaceSpecialtyDesigns.com

How about a group purchase?

ok:D

Will this cage fit wit corneal A4 seats?

Corbeau A4 seats?

ScubaSteve made them work with his C6Z06 and Corbeau's and the RSD Roll Bar.

Check his out.

We have them in stock and ready to ship to you. They install in just a few hours in your garage or driveway, no lift required. You don't even have to remove the seats!! They come with all the hardware needed to install, and included is a complete instruction manual with pictures.

http://i273.photobucket.com/albums/j...s/PA310387.jpg

Also available in 6 point W/Passenger door bar

http://i273.photobucket.com/albums/j...s/P9040346.jpg

Buy them here for Just $1,150!! plus Shipping

http://www.racespecialtydesigns.com/product.php?productid=125&cat=85&page=1

Steve@RaceSpecialtyDesigns.com

Out of curiosity how cramped does the footwell get in stick cars with this? it looks the base of the door bar gets pretty close to the clutch.

The Tubing is 1.75 and it should be pushed right up almost against the kick panel. So, not really obtrusive, still a straight shot for your leg to the clutch.


http://i273.photobucket.com/albums/j...s/PA310388.jpg

Steve

Who else is ready to go 10.0 legally? We are blowing them out pretty fast right now. We have a few in stock right now ready to ship. Get yours now!
Just $1,150 for a 5 point, $1,450 6 point Plus shipping!!

http://i273.photobucket.com/albums/j...s/PA150376.jpg

Steve@RaceSpecialtyDesigns.com

What time is this legal for?

What is the next step or what do you add on for the next level?
And what part of the bar?

How do they install with out lifting the car is what I wanna know?

And do you need a 5 point or 6 point to be NHRA legal to run 10.8-11.4s?

NHRA requires a 5 point to run from 11.49 to 10.0.
6 point is not required at all. Some people prefer the 6 point to offer some extra protection to their passengers for road courses.

Steve

Who else is ready to go 10.0 legally? We are blowing them out pretty fast right now. We have a few in stock right now ready to ship. Get yours now!
Just $1,150 for a 5 point, $1,450 6 point Plus shipping!!

http://i273.photobucket.com/albums/j...s/PA150376.jpg

Steve@RaceSpecialtyDesigns.com

Steve, I'm curious, what does the 5-point cage weigh?

These are sweet, btw!

The 5 point Roll bar assembly weighs 42 lbs.



Steve

Who else is ready to go 10.0 legally? We are blowing them out pretty fast right now. We have a few in stock right now ready to ship. Get yours now!
Just $1,150 for a 5 point, $1,450 6 point Plus shipping!!

http://i273.photobucket.com/albums/j...s/PA150376.jpg

Steve@RaceSpecialtyDesigns.com

Im ready to go 9's legally

Yes you will need a certified 8 point. Do you do a lot of racing? Because you will also need an NHRA License. If you start with the RSD 6 point, you could have the Halo and the front downtubes added inside the car.
Ours is .083 4130 Chrome moly. The main hoop, down tubes and door bars are all 1.75" tubing and the harness loop is 1.25".
Steve

Do these bolt in? Any pics of install process?