Steeroids Rack & Pinion Steering C1/C2/C3 install pics below
Steeroids Power Rack for C1 53-62 C2/C3 63-82 DON'T LET THIS GET BY YOU ORDER NOW!!! SAVE THOUSANDS OVER THOSE MUSTNG II UNITS NO WELDING 6-8 HOURS TO INSTALL NO MORE WELDING CROSSMEMBERS AND MUSTANG II FRONT ENDS http://www.xplosiveperformance.com/t...axx=300&maxy=0 EVERYTHING YOU NEED TO PUT RACK AND PINION STEERING ON THAT C1 Steeroids™ Offers Improved Steering Feel - Recirculating ball steering is vague and unresponsive, especially "on center". Control is greatly enhanced. Kit is adjustable for bump steer. Steeroids Offers Quicker Ratio - Steeroids™ power kits yield approximately 2.5 turns lock-to-lock (~2.9 for manual). Steeroids Are Lighter Weight - Compared to the stock steering system. Steeroids Offer Bolt On Installation - Absolutely no welding, cutting or drilling. Installs with basic hand tools in approximately 6 hours. Steeroids Come As A Complete Kit -All necessary parts are included Parts Included With Steeroids: Rack and pinion - (paint finish) Adapter brackets (powder coated gloss black) Tie rod ends (Self cleaning & lubricating, teflon lined, adjustable for bump steer). U-joint assembly (Alum Alloy) Power steering hoses Misc. fasteners (grade-8) Steering Column Power Steering Pump Power Steering Pump Pulleys & Mounting Brackets 1953-1962 Corvette
Suspension Kits/Steering Racks 1963-1982 Corvette Steering Racks & Boxes ORDER ONLINE CALL TOLL FREE 888.493.8041 PM We install everything we sell |
CALL TOLL FREE or PM for ADDED SAVINGS NOW THRU THE END OF APRIL |
All requested pricing has been sent via PM
Thank you |
PM sent
Thanks |
Some pic's of the Rack and Pinion on a 58 Corvette we just finished installing in our shops. More pic's to come.
Installed power rack with a paintable column we painted white to matched interior color Everything bolt on no welding or cutting http://a5.sphotos.ak.fbcdn.net/hphot..._3785181_n.jpg http://a7.sphotos.ak.fbcdn.net/hphot..._3212612_n.jpg http://a1.sphotos.ak.fbcdn.net/hphot..._3890087_n.jpg http://a3.sphotos.ak.fbcdn.net/hphot..._4026272_n.jpg |
As promised some more install photos. Now remember there is no welding or cutting of anything to install this kit. Unbolt the stock steering components and install the new kit. Ever want to go back to original unbolt and reinstall stock. http://a5.sphotos.ak.fbcdn.net/hphot..._1064299_n.jpg http://a3.sphotos.ak.fbcdn.net/hphot..._2592833_n.jpg http://a1.sphotos.ak.fbcdn.net/hphot...6_469357_n.jpg http://a7.sphotos.ak.fbcdn.net/hphot..._8020267_n.jpg PM or Call Toll free 888.493.8041 For Corvette Forum Pricing |
Good pics on another R&P install on a C1. I'd like to see Steeroids begin using real tie-rod ends with dust boots and zerk grease fittings on both ends to increase service life, but I understand the need to have something adjustable. If you still have the car in your shop, you may want to unclude a couple pics of the power steering pump installed also, since its included in a few of their kits. Wondering if you had to dumb down the fluid pressure at the pump to reduce twitchiness also. You may want to link this thread to the C1/C2 forum as well, since you've got install pics & there's probably at least a few guys on the fence whether to install this kit on their ride this summer.
|
Originally Posted by Viking427
(Post 1577403970)
Good pics on another R&P install on a C1. I'd like to see Steeroids begin using real tie-rod ends with dust boots and zerk grease fittings on both ends to increase service life, but I understand the need to have something adjustable. If you still have the car in your shop, you may want to unclude a couple pics of the power steering pump installed also, since its included in a few of their kits. Wondering if you had to dumb down the fluid pressure at the pump to reduce twitchiness also. You may want to link this thread to the C1/C2 forum as well, since you've got install pics & there's probably at least a few guys on the fence whether to install this kit on their ride this summer.
Thank you for comments. The car is gone the owner is out having fun, driving it with the top down in the beautiful Florida sun. We certainly did miss the pump. I can tell you it fits perfect on the block it uses a KRC mounting bracket and a C5 TC power steering pump and fits perfect. Comes with a nice chrome pulley and overbraid lines. In the second set of pictures and the second pic you can see the back side of the pump. This kit makes driving these C1 so much more fun. We did not have to adjust pressure on the pump no twitchness at all. Now we did not take the car over 70 MPH on the highway. On the next instal we will get good pics of the pump have another one coming in. Not sure how you link it I know cars better than forums and puters Thanks |
IT's Spring time to drive those beauties and have fun do now with power rack and pinion. SPRING SALE STARTS TODAY
|
CALL TOLL FREE or PM for ADDED SAVINGS NOW THRU THE END OF JUNE |
CALL TOLL FREE or PM for ADDED SAVINGS NOW THRU THE END OF JUNE We can also install your rack |
CALL TOLL FREE or PM for ADDED SAVINGS NOW THRU THE END OF September We can also install your rack |
Steeroids Rack & Pinion Steering C1/C2/C3 install pics below
|
Originally Posted by Xplosive Performance
(Post 1595020845)
Steeroids Rack & Pinion Steering C1/C2/C3 install pics below
|
Can this still be purchased as manual versus power option.
BH |
Originally Posted by 62cruiseer
(Post 1597078510)
Can this still be purchased as manual versus power option.
BH |
Steeroids Power Rack for C1 53-62
C2/C3 63-82 |
No experience or explanation with your product / picture ... Is the outer shell ( column with VIN ID ) used with your components ? Didn't see a reference.
|
Originally Posted by jrs 427
(Post 1597430290)
No experience or explanation with your product / picture ... Is the outer shell ( column with VIN ID ) used with your components ? Didn't see a reference.
Rack and pinion Adapter brackets (powder coated black) Adjustable tie rod ends (Self cleaning & lubricating, Teflon lined). U-joint assembly Power steering hoses Misc. fasteners (grade-8) Power steering pump Power steering pump pulleys & mounting brackets New Ididit steering column (chrome or painted options available) Uses none of the original parts 1953-1962 Corvette Suspension Kits/Steering Racks 1963-1982 Corvette Steering Racks & Boxes |
" Uses none of the original parts " ........... All I want to know is if the original steering column will fit properly with the remainder of the components...... I am aware additional custom columns are available. If you change the column what do you do with the cars identity tag ??
|
All times are GMT -4. The time now is 08:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands