Denver area vette shops
Greetings from Denver,
New to the forum..Great wealth of info here:thumbs: Looking for some insight from any Denver area vette owners for a quality shop. Just purchased a 07 Z51, and I'm looking for a cam and header install. :cheers: |
Welcome to the forum!
Don't have an answer for you. But you might get better response by also posting your question in the regional forum: http://forums.corvetteforum.com/mountain-prairie-46/ |
Thanks,,I wasnt even aware of the regional forum. :cheers:
|
Under Pressure in the Springs would be a best bet. They are a forum vendor and sell anything you could think of for C5's and C6's.
Low end power, cam, heads, exhaust. Next up is a stroker for up to 600rwhp....way better TQ than the E-Farce space heater. A 416 installed and tuned with your other motor parts is about 8k turn-key. Top end to 1000rwhp is S/C or twin turbo. We use ECS S/C's. It seems that anyone who goes for a ride in one of the twin turbo cars stops asking about supercharging. Also available: meth injection, real fuel systems, E85 conversions, and nitrous. In house load bearing dyno (all wheel drive dyno). Tuning for any platform you can think of. They even added a turbo to a hyundai and nitrous to a minivan (you never know)....AEM stand-alone computer. (719) 575-0202 · 1739 S Academy Blvd, Colorado Springs, CO 80916 |
Originally Posted by SpinMonster
(Post 1577510247)
E-Farce space heater.
|
Originally Posted by SpinMonster
(Post 1577510247)
Under Pressure in the Springs would be a best bet. They are a forum vendor and sell anything you could think of for C5's and C6's.
Low end power, cam, heads, exhaust. Next up is a stroker for up to 600rwhp....way better TQ than the E-Farce space heater. A 416 installed and tuned with your other motor parts is about 8k turn-key. Top end to 1000rwhp is S/C or twin turbo. We use ECS S/C's. It seems that anyone who goes for a ride in one of the twin turbo cars stops asking about supercharging. Also available: meth injection, real fuel systems, E85 conversions, and nitrous. In house load bearing dyno (all wheel drive dyno). Tuning for any platform you can think of. They even added a turbo to a hyundai and nitrous to a minivan (you never know)....AEM stand-alone computer. (719) 575-0202 · 1739 S Academy Blvd, Colorado Springs, CO 80916 I might have to stop by and see one of these turbo monsters some time. Thanks for the post as I figured Id have to venture to Denver or another state to get any word done :) |
All times are GMT -4. The time now is 08:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands