CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C5 Parts for Sale/Wanted (https://www.corvetteforum.com/forums/c5-parts-for-sale-wanted-53/)
-   -   Dallas Performance Stage II blower cam (https://www.corvetteforum.com/forums/c5-parts-for-sale-wanted/2885322-dallas-performance-stage-ii-blower-cam.html)

BLOWNBLUEZ06 08-02-2011 12:03 AM
Dallas Performance Stage II blower cam
 
I have a Dallas Performance Stage II blower cam for sale. I'm not sure if Taylor cares about me giving out the specs, so I will refrain from publishing full specs and PM them to interested parties. I made 1021RWHP with this cam and over 1kRWHP on 2 separate dynos on 90+ degree days with pump gas and methanol injection. On my 403, it pulled 10" of vacuum and driveability is excellent with this cam with only a slight buck at very low loads RPMs with a standard trans. Rough specs high 230's intake and low, low 250's exhaust. ~611/612 lift and a high LSA
Here's a video of how the cam sounds.




325.00 shipped to the lower 48
Paypal preferred.
My cell# is 972-741-7457

Mr.Big 08-02-2011 10:24 AM
Nice cam!!! What heads are you going with? and how much for the AFR's?

sami85L98 08-02-2011 06:38 PM
If that does not have low rpm buck than i would have serious dip on it, have Tsp V2 cam and had to drive in beyond heavy traffic bumper to bumper, just tired of low rpm buck <1000 rpm otherwise i love that cam, BTW arun tuned my car, cant have better tune that this.

GL on sale bret, i love to buy from a member like you.

PMPNSEZ 08-02-2011 07:47 PM
I'm very interested. Been looking for 225's a good turbo cam and intake. Package deal? PM with specs if possible

kageryu311 08-03-2011 04:00 AM
I would like some information on those heads and intake please.

BLOWNBLUEZ06 08-03-2011 04:26 PM
Originally Posted by Mr.Big (Post 1578297312)
Nice cam!!! What heads are you going with? and how much for the AFR's?
Sorry Big, I thought I subscribed to get notifications and apparently didn't.

It's a secret for now. :yesnod:

BLOWNBLUEZ06 08-03-2011 04:31 PM
Originally Posted by sami85L98 (Post 1578301853)
If that does not have low rpm buck than i would have serious dip on it, have Tsp V2 cam and had to drive in beyond heavy traffic bumper to bumper, just tired of low rpm buck <1000 rpm otherwise i love that cam, BTW arun tuned my car, cant have better tune that this.

GL on sale bret, i love to buy from a member like you.
Thanks buddy. Sorry for the delay in reply. I didn't get my reply notifications. You're right. Arun is great. This cam was chosen for better low end vacuum and driveability. I get an occasional, only slight buck. Nothing like some cars I've tuned. :ack: Only 8.5 degrees overlap on this baby, but it pulls like a mad ape up top. :thumbs:

Originally Posted by PMPNSEZ (Post 1578302430)
I'm very interested. Been looking for 225's a good turbo cam and intake. Package deal? PM with specs if possible
PM headed your way.

BLOWNBLUEZ06 08-04-2011 12:07 AM
The heads and intake are spoken for. Still have the cam though.

BLOWNBLUEZ06 08-04-2011 12:25 PM
I will PM specs if you're interested.

JMBLOWNWS6 08-04-2011 12:27 PM
Im tempted to get this cam.

BLOWNBLUEZ06 08-04-2011 12:29 PM
Originally Posted by JMBLOWNWS6 (Post 1578318384)
Im tempted to get this cam.
Well you're not far away. It should hit your door one day after I ship it. :yesnod:

BLOWNBLUEZ06 08-13-2011 04:46 PM
Still available.

BLOWNBLUEZ06 08-14-2011 06:36 PM
Rough specs added. Price lowered.

BLOWNBLUEZ06 08-19-2011 10:38 AM
everything in this thread sold. :woohoo:

Tact 08-19-2011 07:20 PM
Originally Posted by BLOWNBLUEZ06 (Post 1578454427)
everything in this thread sold. :woohoo:
:thumbs:


All times are GMT -4. The time now is 11:05 AM.


© 2024 MH Sub I, LLC dba Internet Brands