FS Kooks Catted X Pipe
 

It was a 3"to 2.5" but I cut the 2.5" end off and welded on a 3" section to work on the setup I had. Mileage is unknown but not very high, it has spent its life being installed on cars to pass NJ inspection. It was usually off as soon as it got home. :lol: Im in FL now so I do not need it for inspections anymore. This is just the X, no mids.

I forget what I paid and was having trouble finding what the are worth here. Everything I find is new. How about $350 shipped.

:lurk:

:cheers:

Very Interested. Send me some pics. jmsilk69@hotmail.com

Interested as well ... Will these work with tpis headers?

As far as I know all aftermarket x pipes should be interchangable.

http://i24.photobucket.com/albums/c3...s/IMG_5544.jpg

http://i24.photobucket.com/albums/c3...s/IMG_5543.jpg

Honestly don't know if these will fit. I know at least the front section is slip-on for mine. I'll be pulling mine later and will let you know if I want them if they're still available.

Sorry, I read this wrong. I have an xpipe I was looking for some headers. Sorry about that.

:lurk:

Don't think it's going to work for me ... Free bump for you

Yours narrows to 2.5 at the x pipe?

Mine have the headers going into two separate cats, then that attaches to the x-pipe. X-pipe attaches to the cat back. It looks like the kooks have the x-pipe and cat as one assembly. You can check out some pictures here:

http://97vette.com/howto/headers/index.html

Just doesn't seem like it will fit.

:cheers:

does this 3" pipe fit the factory z06 titanium catback?

This is just the X. Youwould need 3" midpipes that run from the from the X to the catback. What setup do you have now?

Kooks LTs offroad 3" xpipe 3" midpipe B&B route 66 catback.

trying to plan a new exhaust set up with cats & z06 Ti.....but not sure what size midpipe & xpipe will fit the Ti. I thought the factory pipes were 2.5"

Your midpipe narrows down to 2.5" at some point and will bolt up to any catback, stock or aftermarket with the exception of the LG Big 3 and the SW 3". As long as your midpipe is 3" where it meets the X pipe my x pipe will fit fine.

By the way, I ran these with Ti exhaust and it was nice and tame just cruising around and a nice sound when you got on it. Not crazy but loud enough to know the car has some power.

:lurk:

Kooks Catted X-pipe
 

Do you still have them

Yes, make an offer.