CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C5 General (https://www.corvetteforum.com/forums/c5-general-103/)
-   -   Spare rim and tire for my C5? (https://www.corvetteforum.com/forums/c5-general/2952730-spare-rim-and-tire-for-my-c5.html)

BossV8 11-20-2011 03:12 AM

Spare rim and tire for my C5?
 
I have no RF on my C5. They would be dangerous here in France with cold and humid weather. Plus I do track and my Michelin PS2 are 10 x better than the regular RF.

Of course, I have an "aerosol" kit. But I would like to be even more secure and get a spare rim and tire.

It would have to fit rear and front wheels, and I also need a jack to go with it. And the best would be if it wouldn't take to much room!

What can you recommend and where could I get it, please?
I have heard something about GTO wheels?

Blown 346 11-20-2011 03:19 AM

The spare tire for the GTO's are what people use.

BossV8 11-20-2011 07:42 AM

Okay. Thanks for the info. Do they fit without any change and where can I get one?

I also read they can damage the rear diff?

Vetteman Jack 11-20-2011 08:08 AM


Originally Posted by Blown 346 (Post 1579264068)
The spare tire for the GTO's are what people use.

That's the only one I've heard people using on the C5. In France, I have no clue where you can get one. Over here, perhaps a salvage yard or a GM dealer should be able to get one.

dougbfresh 11-20-2011 08:28 AM

Where do you plan on keeping the tire AND the jack to get the car off the ground? There are decent run-flats today, spend your money there.

jrose7004 11-20-2011 11:01 AM


Originally Posted by Blown 346 (Post 1579264068)
The spare tire for the GTO's are what people use.

That's the only one I've ever heard of that folks use.

mojo1 11-20-2011 02:56 PM

I bought a cheap wheel, put one of my old tires on it and use it only on long trips, works great for me as I hated the run flats.

PhilsFRC 11-20-2011 03:02 PM

Spare
 
GTO wheel is the key but it must modified to fit. The OD of the GTO hub is 69.5mm. The OD of the Corvette hub is 70.5mm. The ID of the Corvette rotor (that goes over the hub) is 70.6mm. My rim is at the machine shop being honed to 70.6mm ID. Some people have just filed them out. You also need a jack and lug wrench. I bought Gorilla's extendable wrench and a BMW e46 jack.

guido7834 11-20-2011 03:54 PM

Don't they have AAA in France:thumbs:


All times are GMT -4. The time now is 08:10 AM.


© 2024 MH Sub I, LLC dba Internet Brands