|
PCV Oil Catch Cans - Two Chamber
PCV Oil Catch Cans $129.99 They come in 4 colors. Red, Silver, Black and Blue http://img.photobucket.com/albums/v4...CanExplode.jpg http://img.photobucket.com/albums/v4...anBlueFull.jpg http://img.photobucket.com/albums/v4...lueCloseup.jpg[/CENTER] Our Oil Catch Cans are made of T-6061 Billet Aluminum. All the fittings on this unit are brass. The catch can is a two chamber design and comes with a changeable filter element for easy cleaning. LSx engines all suffer from oil vapor blow by into the intake manifold under hard driving conditions. The two chamber design helps trap the oil vapor, and separates it into the second chamber for safe keeping. The benefit is that you keep your manifold from getting all gummed up and robbing you of horsepower. PCV Oil Catch Can Link Regards Chip |
I can vouch for Chip's quality on these. My track car and street car both run these. Great for motors that "drink" oil through the PCV system. Great guy to deal with too!
My suggestion on running these would also be to drill a filter into an oil cap and then block the stock valve cover to intake vent tube. Easy fix and you don't have an oily mess in your intake when you take it off next time! Cassidy |
Hey Chip... does it matter how they're installed i.e. which port is the inlet vs. outlet? I installed mine like your website shows and how I've always done it where the top port is the inlet and the bottom port is the outlet. Does it actually matter, or does it work better one way or the other?
|
Originally Posted by travisnd
(Post 1580155156)
Hey Chip... does it matter how they're installed i.e. which port is the inlet vs. outlet? I installed mine like your website shows and how I've always done it where the top port is the inlet and the bottom port is the outlet. Does it actually matter, or does it work better one way or the other?
Top port is the inlet Side port is the outlet. Connect from the PCV to the top of the can Connect from the side of the can back to the manifold. Peace Chip |
Just placed my order! I immediately told 3 co-workers about my purchase. Explained why it's a good buy. And 2/3 ordered one as well. Stil working on that third one lol. Can't wait to get installed!'
|
Originally Posted by Underdogg
(Post 1580267052)
Just placed my order! I immediately told 3 co-workers about my purchase. Explained why it's a good buy. And 2/3 ordered one as well. Stil working on that third one lol. Can't wait to get installed!'
I appreciate the referrals :thumbs::thumbs: Both your orders are shipping in the AM Peace Chip |
All Black Back Orders will ship tomorrow.
We have lifted the back order status from the website :thumbs: Sorry for the delay Peace Chip |
i use 2 of these and they work great. thanks.
|
Originally Posted by 2MCHPWR
(Post 1580761496)
i use 2 of these and they work great. thanks.
Peace Chip |
Is that a drain on the bottom?
:) |
Originally Posted by froggy47
(Post 1580789071)
Is that a drain on the bottom?
:) Peace Chip |
I saw one today at autox on LS built motor, guess I need one. Any group buys on these or free shipping or senior discount?
:D:D |
Originally Posted by froggy47
(Post 1580796922)
I saw one today at autox on LS built motor, guess I need one. Any group buys on these or free shipping or senior discount?
:D:D If you look into other products, you will see we are The best quality and the best price :thumbs: Peace Chip |
Originally Posted by CCA Corvette Parts
(Post 1580797759)
Sorry Bob, we sell them as fast as we make them...
If you look into other products, you will see we are The best quality and the best price :thumbs: Peace Chip |
Would these mount on a 2011 ZR1?
|
Originally Posted by whatcop?
(Post 1581483584)
Would these mount on a 2011 ZR1?
Catch Cans are not location specific parts. As long as you can run the lines to the can, you are good to go. Peace Chip |
All current orders shipping Monday :thumbs:
Peace Chip |
Do you have any blue ones in stock?
|
Originally Posted by whatcop?
(Post 1581488456)
Do you have any blue ones in stock?
Peace Chip |
Are these available with Black Anodized fittings/ hose clamps/ hose?
|
| All times are GMT -4. The time now is 05:20 PM. |
© 2024 MH Sub I, LLC dba Internet Brands