Drivers door pushbutton removal
My wife just two months ago took delivery of a 2008 C6 with only 5K miles. Today the drivers door release "pushbutton" did not pop back when pushed, and the door has to be opened by the emergency release pull. I am thinking that by pulling the switch and getting it released from the present position is the solution. Question is how do i get this pushbutton out of the door? Concerned that if I do it wrong I end up with a scratched cover and etc. Any help would be appreciated. :thumbs:
|
Welcome to the forum.
I will move your thread to the C6 General forum where they will be glad to help you. |
Just put a thin screwdriver carefully under the silver piece that surronds the black button and pop it out. So easy
|
Originally Posted by LOUSVETTE
(Post 1580195750)
Just put a thin screwdriver carefully under the silver piece that surronds the black button and pop it out. So easy
|
You don't really even need a screwdriver. You can just grab the edge with your nails and it will pull off. That is how we take them off here at the shop.
|
Welcome to the forum and Congrats on the purchase of your Vette. :salute:
|
Originally Posted by MacC608Vette
(Post 1580201095)
Welcome to the forum and Congrats on the purchase of your Vette.
|
Thanks for the assist. We found that the pushbutton had the bottom of the flange broken and as a result the button slipped and jammed. Not a common problem and new button is being shipped from michigan.
|
All times are GMT -4. The time now is 12:47 PM. |
© 2024 MH Sub I, LLC dba Internet Brands