NEW! RPI Z06/GS Front Splash Guards - Long Awaited!
Hello!
Please note. The top isn't finished, it'll taper to the body. This is our first proto-type. ** Available for cars without ZR1 side skirts and also availble for cars with our ZR1 style side skirts, or GM's ZR1 side skirts *** You guys have been asking us for sometime to create a splash guard for the back of the front wheels on your Z06 and Grand Sport. We've come up with a nice design that matches the rear splash guard that GM installs from the factory. Here are the pictures: http://rpidesigns.com/images/rpiz06splash2.jpg http://rpidesigns.com/images/rpiz06splash1.jpg Just to compare, here is the GM splash guard from the factory on the rear wheel: http://rpidesigns.com/images/z06splashreargm.jpg Please give us your questions and comments. If you guys like the design, we'll build the molds and start offering them for sale. We'll take pre-orders. These are hand made in the USA! We are looking to start shipping April 16th. Pricing: *Flat Black: $199.95 /set (we'll include an optional rubber gasket) *Pre-Painted Any Body Color: $279.95 /set *Carbon Fiber: $299.95 /set (overlay on the back side only. Front will remain flat black) We are taking pre orders on the forum. Please send us your name and address if you'd like to be added to the list. You can either email us: Josh@rpidesigns.com, PM us, or call us. https://cimg7.ibsrv.net/gimg/www.cor...7faf6f49c6.jpg https://cimg8.ibsrv.net/gimg/www.cor...3937ca59b8.jpg https://cimg9.ibsrv.net/gimg/www.cor...f966bfb117.jpg https://cimg0.ibsrv.net/gimg/www.cor...fa236e72b7.jpg[/QUOTE] :cheers: |
How will they attach ??
|
I'm interested, but 199.99 is gonna be out of my price range. They do look nice though.
|
Originally Posted by RPI Designs
(Post 1580328046)
Hello!
Pricing: *Flat Black: $199.95 /set (we'll include an optional rubber gasket) *Pre-Painted Any Body Color: $279.95 /set *Carbon Fiber: $299.95 /set (overlay on the back side only. Front will remain flat black) We are taking pre orders on the forum. Please send us your name and address if you'd like to be added to the list. You can either email us: Josh@rpidesigns.com, PM us, or call us. Will you have a version compatible with your ZR1 side skirts? |
Ok Josh…Finally. :thumbs:
Can you please measure how far these extend out from the fender, measured at the widest point (near the bottom) and post or PM me the dimension? Thanks. |
Originally Posted by Stan0324
(Post 1580328071)
How will they attach ??
|
Originally Posted by mjslouz06
(Post 1580328182)
Will you have a version compatible with your ZR1 side skirts? |
Originally Posted by Cypher
(Post 1580328253)
Ok Josh…Finally. :thumbs:
Can you please measure how far these extend out from the fender, measured at the widest point (near the bottom) and post or PM me the dimension? Thanks. We used the same taper that GM did on the rear splash guards. I think those look good. We went with the same idea. |
Originally Posted by RPI Designs
(Post 1580328327)
Yes, widest point is 1.5".
We used the same taper that GM did on the rear splash guards. I think those look good. We went with the same idea. |
Is it wide enough at the bottom to deflect the sand and rocks away from the rear brake ducts?:thumbs:
The current APSIS design is approx 2 3/4 in. wide at bottom. FWIW |
Originally Posted by RUBYREDVET
(Post 1580328542)
Is it wide enough at the bottom to deflect the sand and rocks away from the rear brake ducts?:thumbs:
The current APSIS design is approx 2 3/4 in. wide at bottom. FWIW http://forums.corvetteforum.com/1580322697-post6.html |
Is the material they are made from, resistant to chipping? Others have mentioned in threads, the currently available products, are to big, expensive, and leave little white specks, from chipping! Looking forward to the finished product! :thumbs: :cheers:
|
Looking GOOD! Thanks for making this happen for us!
|
Originally Posted by Cypher
(Post 1580328595)
Yes, 1.5" is perfect...see my analysis in the link below.
http://forums.corvetteforum.com/1580322697-post6.html |
Looking good!
|
When do you expect to be ready to ship?
|
Looks very good Josh...thanx for your efforts on this!
|
Originally Posted by PittMD1
(Post 1580329065)
When do you expect to be ready to ship?
|
Not to hijack but Josh, please answer your emails/pms. I have been trying for over a week now to get in touch with you.
|
Looks very good, How will they be with your side skirts? cus I just ordered your CF side skirts and wondering how they will match
|
All times are GMT -4. The time now is 10:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands