Interior LED Install: Steps w/loads of pics
 

Over the weekend I installed an interior LED-light system that I got from Andrew6 at DoubleAA <CLICK HERE>. The system was a PITFA to install, but worth the effort.

I'm going to post the pics with captions, as that is easier with so many photos. Of note, I chose blue LEDs, got the LED cupholder, LED strips for the footwells and waterfall, they came with a RF remote control on/off/dimmer, and a battery pack to test the strips and wiring. I added some extra LED strips to the install so things would be brighter. This took me most of the full-day on Saturday, and to do this I removed the center bezel, armrest, upper footwell covers and loosened the tunnel tray and waterfall. I may have missed an explanation here or there, but this should illustrate the project fairly well.

I chose to link the footwell & waterfall LEDs to the cabin light circuit so as they come on/off with the door opening or from the cabin light button. For the cupholder LEDs I linked to the shifter indicator light so it was on/off with the headlights. It is a wild scene when lit up at night!

Let me know your thoughts and if you have any questions ...


http://i1103.photobucket.com/albums/...Project-01.jpg

http://i1103.photobucket.com/albums/...Project-02.jpg

http://i1103.photobucket.com/albums/...Project-03.jpg

http://i1103.photobucket.com/albums/...Project-04.jpg

http://i1103.photobucket.com/albums/...Project-05.jpg

http://i1103.photobucket.com/albums/...Project-06.jpg

http://i1103.photobucket.com/albums/...Project-07.jpg

http://i1103.photobucket.com/albums/...Project-08.jpg

http://i1103.photobucket.com/albums/...Project-09.jpg

http://i1103.photobucket.com/albums/...Project-10.jpg

http://i1103.photobucket.com/albums/...Project-11.jpg

http://i1103.photobucket.com/albums/...Project-12.jpg

http://i1103.photobucket.com/albums/...Project-13.jpg

http://i1103.photobucket.com/albums/...Project-14.jpg

http://i1103.photobucket.com/albums/...Project-15.jpg

http://i1103.photobucket.com/albums/...Project-16.jpg

http://i1103.photobucket.com/albums/...Project-17.jpg

http://i1103.photobucket.com/albums/...Project-18.jpg

Super write up!...

Thanks...

Way to go, looks good with all the pics!!

Nice job and write up! :cheers:

Unrelated: What did you use to fill in the corvette lettering on your dash?

Great write up... Always appreciate a fellow member taking his time to do this for others.

wow, great job and the pics and write are very nicely detailed. Thanks

Looks cool/:thumbs:

Looks darn good bill.

Those are the yella poly inserts from RPI



The dimmer is pretty sweet Andrew, thanks for sending that :thumbs:

no problem. The remote dimmer is pretty sweet. I have some that mount in the console so folks don't have to carry around a bunch of fobs.

:iagree:Very nice:rock:

GREAT Write up. Thank you for taking the time and effort to post this. This is what makes our hobby go....well done!

Looks great!

If any one is interested in this upgrade you can get it here.

http://thedoubleaa.com/cart/index.ph...roducts_id=101

Great write-up. Very well done.

Great Writeup. I am doing this mod as well, but I'm waiting on Dennise from DD Mods with my new DNX9990HD. I only want to remove the radio bezel once if I have to.

Thanks for the the pictures. Very helpful!

Tell me about it, this was like the sixth time I removed the consoles and bezel, just so tough because of the five plugs that have to be disconnected. Oh well ...

:thumbs:WOW!:cheers::cool:

:iagree:

Nuff said

:thumbs:

Just a note. If you put in "LCD-LEDs" you could switch to any color, race-traces, sequences and auto-fades at the touch of a button ... just sayin' :thumbs: