07-Corvette supercharged
2007 Chevrolet Corvette C6
-clean title, 48k on the car about 5k on the motor If you call and I don't answer please leave a message with your name and number so u can get back to you. Factory Options: Fully Equipped. 3LT Trim level, F55 adjustable suspension, Targa top, 6-Speed manual transmission, heated leather seats, navigation, Heads-Up Display, Bose Stereo. Modifications (Interior & Exterior): Z06 Rear Quarter Panels, custom Strasse Forged rims with new tires and TPMS sensors, K40 Calibre Radar detector with front and rear scramblers, JL Audio subwoofer in Stealthbox, Rockford Fosgate Amp, Custom A-Pillar dual gauge pod with Defi Boost and Fuel Pressure Gauges, Defi-Link Control Unit II (located in Glove Box), 20% window tint. ZR1 Carbon fiber splitter, side skirts, and spoiler. Also installed black out kit for all the lights. Modifications (Performance): 406ci LS2, D1SC Procharger, Snow Performance Dual Nozzle Meth Kit, Kooks Long-tube headers, Corsa Exhaust, Kenne Bell Boost-a-pump, DeWitt Radiator. Modifications (Engine Specific): Cylinders finished at 4.007", Callies Crank (magnafluxed and polished with Clevite H Main and rod bearings), Custom Diamond Racing Pistons with a 1/16 ,1/16 , and 3/16 ring pack, and a set of blower wrist pins. Piston to wall clearance set at .004. Custom set of Total Seal Zero gap rings installed with .028 on the top ring, and .022 on the second ring. Oliver rods, Lingenfelter Cam, Mellings High Volume oil pump. I bought this car with a Lingenfelter 403, and recently upgraded to the 406 . The 403 was good for maybe 12lbs of boost where the 406 is good for 25psi. I've only ever had the 4" pulley that's on the car now and it makes approximately 12psi. Everything ever done to this car was absolutely top notch and to perfection. $43k obo (757) 302-3220 This car is listed as obo, but I don't really need to sell it. All offers considered, but please no low ballers or tire kickers. http://forums.corvetteforum.com/pict...ctureid=113282 http://forums.corvetteforum.com/pict...ctureid=113283 [IMG]http://forums.corvetteforum.com/pict...ctureid=113282[/IMG] http://forums.corvetteforum.com/pict...ctureid=113285 |
Nice car, if you get priced right I'm interested, otherwise good luck on the sale
|
Originally Posted by autodesign21
(Post 1581110880)
Nice car, if you get priced right I'm interested, otherwise good luck on the sale
|
interior pics?
|
|
RWHP might get the ball rolling
|
Originally Posted by 04gtogoat
(Post 1581114791)
RWHP might get the ball rolling
I spoke to ED today and the plan he wants to do is get it straight on monday. I have to get my schedule straight since next week I have to go on leave to attend a wedding for my sister in law. But I remember him telling me the car made over 700 and his exact words were this thing is making tons of power. I didn't care to ask for a dyno sheet because it wasn't the final numbers. I am not a snake or trying to rip someone of there hard earned money. Lord knows i had to bust my ass and do multiple deployments to the middle east before I was able to get all this done. Ed is on the forum and I am sure if I asked he would come in here and confirm all this. Any questions please feel free to ask and i will do my best to answer it. Frank |
location?
|
Originally Posted by baddboyz03
(Post 1581118285)
location?
|
Good looking car!
|
Update. New injectors are in along with the map sensor, just have to finish up a few things on the tune and do a couple wot pulls on the dyno.
Also we went with ID1000 instead of the 850. Willing to take 43k obo. All reasonable offers will be considered Thanks Frank |
All times are GMT -4. The time now is 09:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands