C3, mostly 73 parts
 

Need room in the garage to finish my 73 project. Unless otherwise specified, all the parts are from a 73 BB Coupe that I bought in March 07. I'm not sure of the pricing for this stuff, so make an offer. Of course, if you think I'm asking too little, feel free to offer more :D.

For more pix of the parts go to this link:

http://photobucket.com/carlsparts

1. Gas tank only - no filler neck, sending unit, or black plastic venting thingie on the driver side top front. The PO told me the tank had been "sealed". The inside looks like it has been coated. I took a couple pix of the inside, too. $150.00

[IMG]http://i69.photobucket.com/albums/i4...s/DSCN9853.jpg[/IMG]
[IMG]http://i69.photobucket.com/albums/i4...s/DSCN9851.jpg[/IMG]
[IMG]http://i69.photobucket.com/albums/i4...s/DSCN9857.jpg[/IMG]
[IMG]http://i69.photobucket.com/albums/i4...s/DSCN9852.jpg[/IMG]


[IMG]http://i69.photobucket.com/albums/i4...s/DSCN9444.jpg[/IMG]

2. Front sway bar. $75.00

[IMG]http://i69.photobucket.com/albums/i4...s/DSCN9850.jpg[/IMG]
[IMG]http://i69.photobucket.com/albums/i4...s/DSCN9849.jpg[/IMG]
[IMG]http://i69.photobucket.com/albums/i4...s/DSCN9848.jpg[/IMG]


3. Rear sway bar. $75.00

4. Luggage rack. Missing two of the rubber tips. $100.00

[IMG]http://i69.photobucket.com/albums/i4...s/DSCN9389.jpg[/IMG]
[IMG]http://i69.photobucket.com/albums/i4...s/DSCN9388.jpg[/IMG]

5. SOLD4 spd shifter.

6. Seats: $300.00 Non-original vinyl and cloth upholstery. Okay for driver or solid frames for reupholstering. Oxblood. NO SEAT TRACKS. More pix at photobucket link above

[IMG]http://i69.photobucket.com/albums/i4...s/DSCN9869.jpg[/IMG]

[IMG]http://i69.photobucket.com/albums/i4...s/DSCN9873.jpg[/IMG]

[IMG]http://i69.photobucket.com/albums/i4...s/DSCN9866.jpg[/IMG]

More parts listings to come. Stay tuned.

Do you have the original hood insulating blanket?
Steve L.

Sorry, no.

interested in the shifter assy... PM sent.:cheers:

Parts added and some sold
 

ttt

How 'bout a EGR valve and bracket?

Sorry, don't have them.

What are the dimensions of the hole pattern on rack?

I'll have to unpack it to measure. I didn't know there is a difference. This one is from a '73.

Bump!

Whoa. A bump to a four year old thread? At least it isn't someone asking for something to an old dead thread, it is from the original poster!

Got anything to add to the list? The images don't seem to be loading anymore either.

GLWS