1963 2 1/2 " center exhaust hanger bracket
 

Can someone who is restoring a 1963 corvette roadster frame provide a detail picture of how & where this bracket is attached to cross member ? Thanks

1963
 

need your help.......................rick

Rick...if you have the Corvette Assembly Manual, the location is shown in Section 8, sheet 6.00 (page 152 of the copy that I have, but not all copies are the same). Had the same problem you are having...mine was missing and took a while to figure out where it went. It goes on the engine side of the first cross member.

1963
 

thanks...........................rick

1963
 

does it go on the top of the frame bracket or the bottom of the frame bracket ? thanks

1963
 

ttt

Below the frame tabs. It can be a real bear sometimes.:thumbs:

1963
 

next question is , which way does the ( L ) bracket go inward out outward .......................... THANKS RICK

1963
 

ttt

Do you have the Assembly Manual? All the parts and attachments are shown in detail in Section 8, sheet 6.00. :thumbs: