Procharger p1 kit
Sold!
|
bump!
|
Is this everything needed for a bolt-on installation on a 100% stock Z06?
|
Originally Posted by remix919
(Post 1582538154)
Is this everything needed for a bolt-on installation on a 100% stock Z06?
|
How many miles did you use this for? And where can I get the kit and what fuel system were you using?
|
Originally Posted by remix919
(Post 1582539741)
How many miles did you use this for? And where can I get the kit and what fuel system were you using?
sent out a couple of pms |
bump
|
pending sale
|
again back to the top
|
Aww baby intercoolers
|
Since I cant seem to selll it locally im willing to ship it, it will be like 2 or 3 boxes
|
saturday bump
|
Did your buddy buy it new or was it used?new to the supercharger deal but is 16k miles a lot for these? How long do they normally last before a rebuild is needed?
|
$2800 and Ill pick it up this week?
|
rastusman, i have no clue at what miles it has to be rebuild.
breeze84 u have a pm |
Originally Posted by MrH00nel2
(Post 1582559133)
Aww baby intercoolers
Funny you should say that - these are "NOT" the baby Intercoolers these are the larger edition of the Twin Intercoolers Procharger makes - These are actually very, very efficient and keep IAT's down by splitting the Forced Induction Cahrge and then meeting up again - So just for information sake - on my 347 with this set-up I made 701 RWHP on 14 PSI of Boost and a 3.2" pulley - With this set-up my buddy made 565 RWHP on his fulley stock '04 MN6 Coupe with a 3.6" pulley and 12.5 PSI of Boost This Procharger and set-up will make tremendous power, especially when combined on a H/C set-up - Thanks,Matt |
Originally Posted by madmatt9471
(Post 1582583480)
BUMP for you and a little input!
Funny you should say that - these are "NOT" the baby Intercoolers these are the larger edition of the Twin Intercoolers Procharger makes - These are actually very, very efficient and keep IAT's down by splitting the Forced Induction Cahrge and then meeting up again - So just for information sake - on my 347 with this set-up I made 701 RWHP on 14 PSI of Boost and a 3.2" pulley - With this set-up my buddy made 565 RWHP on his fulley stock '04 MN6 Coupe with a 3.6" pulley and 12.5 PSI of Boost This Procharger and set-up will make tremendous power, especially when combined on a H/C set-up - Thanks,Matt |
pm sent, looks like it might finally be gone
|
No word from the buyer, any offers?
|
responded to some pm's
|
All times are GMT -4. The time now is 08:31 AM. |
© 2024 MH Sub I, LLC dba Internet Brands