F/S 2007 Z06 LS7 Longblock or Part out
SOLD!
I dropped a valve like so many others in my 2007 Z06 at about 45k miles. I was going to just repair the head and sleeve but I ended up buying another motor here on the forum. The valve actually dropped when I was in reverse parking the car, so it didn't let loose under load. The #1 cylinder sleeve has a crack in it and the drivers side head has some damage as well as you can see in the pics below. From the research I have done you can have the block repaired/re-sleeved for about $600-$800. The rotating assembly still moves freely so there does not appear to be any other damage. The longblock includes: $2800 - Full rotating Assembly in block - Timing Chain and cover - Harmonic Balancer - Oil Pump - Oil Pan - Custom Made Rear Mounted Dry Sump Oil Tank with steel braided lines - Water Pump - Heads with springs, rockers and push rods - Intake Manifold with fuel rail - 50# Delphi Injectors PM me if you have any questions or email at jad568 at gee mail dot com. Prices do not include shipping... Thanks, -John http://forums.corvetteforum.com/memb...207-131475.jpg http://forums.corvetteforum.com/memb...124-131477.jpg http://forums.corvetteforum.com/memb...637-131554.jpg http://forums.corvetteforum.com/memb...354-131476.jpg http://forums.corvetteforum.com/pict...ctureid=130871 http://forums.corvetteforum.com/pict...ctureid=130870 http://forums.corvetteforum.com/memb...732-131553.jpg |
TTT for a great weekend deal!
|
what is the bottom dollar would you take for motor heads and intake
|
Originally Posted by speedyjoe
(Post 1582739813)
what is the bottom dollar would you take for motor heads and intake
|
Monday Bump... Engine is coming out tomorrow and will be ready to go!
|
Engine is out and ready for a new home!
http://forums.corvetteforum.com/memb...207-131475.jpg http://forums.corvetteforum.com/memb...354-131476.jpg http://forums.corvetteforum.com/memb...124-131477.jpg |
Friday bump! I'm now throwing in the dry sump custom made tank and lines as part of the longblock deal!
|
Weekend bump....
|
PM sent
|
pm sent
|
not a bad deal. good luck!
|
Originally Posted by walhan_qtr
(Post 1582813318)
not a bad deal. good luck!
|
I have no reply
|
Originally Posted by Jasperstang308
(Post 1582814460)
I have no reply
|
Good evening
I PM'ed you.
|
Ttt
|
ttt
|
ttt
|
Priced Dropped from $3000, now $2800 takes the entire longblock with all components mentioned.
-John |
ttt - Weekend Deal!
|
All times are GMT -4. The time now is 10:37 PM. |
© 2024 MH Sub I, LLC dba Internet Brands