FS: Flat Black Supercharged Wide Bodied C6 w/ YSI Meth, Nitrous, etc etc etc.
UP for sale is my 2008 C6 Corvette.
Where to begin. This vehicle has been through a massive transformation and all the while GARAGE-KEPT and never rained on. I will be including a car cover with the car. I am the first and only owner of the car and only the best parts have been used. below is a list of some of the modifications that I can remember off hand. All-in-all I've spent roughly $50,000 just in performance parts (not including massive $$ in labor). Currently, the car makes 604rwhp... hold on, let me finish. It makes 604rwhp with a large and ineffecient pulley (low psi) and no methanol, no nitrous, and no race gas or E85. Just plain Jane 93 octane pump gas. I am including a smaller pulley (higher psi) which can be used and the car can be tuned to make a SUBSTANTIAL amount more power. Personally, I like over building the heck out of things so I can feel confident that they will not break on me. Others may choose to run this car at 16-22psi with methanol and nitrous and get over 1000rwhp out of it, but I personally don't feel the need to run that on the street, even with drag radials they'd be spinning tires well past 130mph. As it stands, this car is fast enough for me and has beaten everything it has come across including a handful of ZR-1's. I have never introduced neither nitrous nor methanol into the engine. The car has roughly 9,000 miles on it and this build has about 2,000 miles. It has never been tracked and usually just gets driven around south beach. I am an attorney, not a race car driver. It's been a fun project and has gotten me a TON of looks on the street and well over one-million hits on YouTube and Hottest Modern Muscle at Hot Import Nights, but it's time for me to move on to something else. I realize I don't have many photos up, but if you are interested I can send you a link to my youtube. PRICE: $65,000 Performance: Massive Vortech YSi V7 Blower / Intercooled Supercharger system 2 pulleys 2 belts Flip Drive System Crank Keyed Aluminum Balancer Forged Engine Internals Bored and Stroked Original LS3 Engine Vavle Job w/ upgraded valves Rossler Performance Automatic Transmission Catch can Dewitts Radiator A1400 Aeromotive in-tank fuel system FuelLab dual -10an in fuel pressure regulator with gauge Dynamated fuel tank and aft of driver in order to keep pump's sound down. -10an Braided fuel lines -6an return -10an MagnaFuel Fuel Filter -10an dual inlet Fuel Lab pressure regulator Custom made Wilson Manifold 10an rails (Each is individually fed with it's own -10an fuel line from the pump. NOT piggy backed like all the other BS fuel kits out there). 85lb injectors ARP head stud bolts ARP header stud bolts 1 7/8" American racing long tube headers (Flat Black JET HOT coated) Dual 3" American Racing X pipe (Flat Black JET HOT coated) Dual 3" APS Cat Back muffler (Heat Wrapped up to the muffler) PFADT coil over independant suspension (Removed Leaf-Spring suspension) Alcohol injection systems methanol kit Snow Methanol safety controller NX Wet nitrous system with black aluminum HSW Plate (2)NX High Flow 15lb Bottle painted flat black Billet Bracket for nitrous bottle which allows the Targa to still be put in the trunk. N/X Spray Bar for Intercooler HSW Cup holder button plate (5) Autometer NEXUS Gauges with controller brain MICROEdge Nitrous Controller Thicker Stiffening Tunnel plate w/ Heat Sheilding Safety: Z06 Brake Calipers and Rotors (Painted black) Steel Braided brake lines (2) SPARCO Red Seats (2) 5pt Red Restraints 3 Nozzel Fire Suppression System with rip cord and 5lb tank (Fuel Tanks, Under Hood, In Cabin) Hand held Fire extinguisher attached to passenger seat 4pt Roll Cage Looks: FULL Z06 widebody conversion Flat black paint not wrap Custom Hood Blacked out engine accessories Brake lights painted blacked out FULL LED interior lighting LED rear license plate lights Large Custom Black Supercharged Emblem Between Brake lights All other badging removed Orange corner lights painted to match car Rear red side marker lights removed and made flush Front quarter panel holes (where Z06 Badge goes) filled in and made flush with car 18x10 Front Flat Black wheels 18x12 Rear Flat black wheels 275/35/18 Nitto Invo Front tires 335/35/18 Nitto 555R Drag Radials in the rear Tints Car Cover My name is John and I can be reached at: (305) 814-8417 SERIOUS BUYERS ONLY. Further terms, conditions and disclaimers apply. Please call for details. http://i1277.photobucket.com/albums/...ps82938c76.jpg http://i1277.photobucket.com/albums/...89bdb401-1.jpg http://i1277.photobucket.com/albums/...ps7a1d5949.jpg http://i1277.photobucket.com/albums/...ps1c7dedb9.jpg http://i1277.photobucket.com/albums/...ps9a0ac42d.jpg http://i1277.photobucket.com/albums/...ps06abb961.jpg http://i1277.photobucket.com/albums/...ps347e5b25.jpg http://i1277.photobucket.com/albums/...ps51f6188e.jpg http://i1277.photobucket.com/albums/...psfac1792a.jpg http://i1277.photobucket.com/albums/...ps3805d6b7.jpg http://i1277.photobucket.com/albums/...ps32f82792.jpg http://i1277.photobucket.com/albums/...pse504325b.jpg http://i1277.photobucket.com/albums/...psc88e6aa8.jpg http://i1277.photobucket.com/albums/...ps0ba83e3b.jpg http://i1277.photobucket.com/albums/...psce850c7a.jpg http://i1277.photobucket.com/albums/...ps52cf0eda.jpg http://i1277.photobucket.com/albums/...pse8c1b7df.jpg http://i1277.photobucket.com/albums/...ps315167bd.jpg http://i1277.photobucket.com/albums/...psf71391c4.jpg |
Impressive build GLWS.
Nice transmission. |
Originally Posted by SpinMonster
(Post 1582759718)
Impressive build GLWS.
Nice transmission. |
This car still for sale?
|
All times are GMT -4. The time now is 12:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands