kooks 1 7/8, t1 swaybars, exoskell
Local only stuff (metro NY area, willing to meet within reason, have a truck for the bigger items)
I have a set of 1 7/8 kooks headers with a 3" catted mid section for sale $900 SOLD Black hood off 03Z $300 Rear bumper cover in Nassau Blue off 00 FRC $300 Black dash pad out of 25K mile 00 (no heads up) $300 00 grey painted thinspoke wheels with stock runflats with 10k miles $500 (no center caps) 02 Z06 OEM speedlines with nitto 555R2's mounted $750(think rears are close to done) Willing to ship stuff Borla touring catback (large fullsize cans) $300 SOLD Borla straight pipes (SUPER loud) $200 - one was cut before I got them had it rewelded T1 sways with the solid endlinks $600 Set of solid endlinks missing one of 8 bolts $60 bucks textrailia exoskel twin disc with about 500 miles on it (turned that car back to stock to sell it and put a LS2 clutch behind the stock LS1, this is overkill for stock power) $600 harnesses. Engine harness for 00 $225 (need a IAT plug) Manual trans harness for 00 $100 Manual trans harness for 01 $100 (this gains an trans temp sensor) The trans harnesses and engine harnesses are different between the years where they connect to each other flat vs D shaped connectors and 5 wire vs 3 wire maf and seperate IAT's Also 01 Z06 PCM $100 |
Pics of Borla straights?? Thank you. (Also guestimate for shipping to 30741)
|
If you would ship the headers and x pipe I would be very intrested in them. What year will they fit and do you have pics? Pm please
|
Originally Posted by lilgbz28
(Post 1582843164)
If you would ship the headers and x pipe I would be very intrested in them. What year will they fit and do you have pics? Pm please
|
the midpipes are 5-6 ft tall and welded guys, I dont even know if they'll ship it that big.
I had them on a 2000, doesn't have any of those stupid air tube pollution crap, made 800 rwhp with a boosted 346 with em. As for the straight pipes probably 25-30 bucks if I have to guess, I never find out until I box them and walk into the UPS store and pay. (If I boxed them and I'm there, they're going out) I know a fullsize catback ran 96 bucks from TX to NY here's some pics from when they came out of the car. Obviously still a bit dirty since I windowed the engine block. http://bertok.us/y2klimited/kooks1.jpg http://bertok.us/y2klimited/kooks2.jpg http://bertok.us/y2klimited/kooks3.jpg |
Wow...if the headers are still available next week (lol) I'm def a buyer. Located in NY.
Edit: or not, from what I'm seeing, headers from a 00 won't fit an 03z? Hope that's wrong. |
Originally Posted by v03z06
(Post 1582845158)
Wow...if the headers are still available next week (lol) I'm def a buyer. Located in NY.
Edit: or not, from what I'm seeing, headers from a 00 won't fit an 03z? Hope that's wrong. I work in Somers so meeting up with you wouldn't be much of a problem as well. |
nm..
|
Originally Posted by undertaker
(Post 1582846583)
they'll fit, its all those non-essential extra weight air tube attachments that you don't need that make up the differences.
I work in Somers so meeting up with you wouldn't be much of a problem as well. |
bump
|
I will take the Borla touring. PMing you now.
|
textrailia exoskel twin disc with about 500 miles on it (turned that car back to stock to sell it and put a LS2 clutch behind the stock LS1, this is overkill for stock power) $600
Is this comes with Flywheel too? nay pics of this clutch? |
Originally Posted by sami85L98
(Post 1582899542)
textrailia exoskel twin disc with about 500 miles on it (turned that car back to stock to sell it and put a LS2 clutch behind the stock LS1, this is overkill for stock power) $600
Is this comes with Flywheel too? nay pics of this clutch? |
|
ttt
|
I need money for direct port, buy this stuff...
|
Drive the headers down to Kansas! Haha
|
Originally Posted by BuddhaZ06
(Post 1582986177)
Drive the headers down to Kansas! Haha
I'm guessing gas would be worse at 11 mpg. And I want/need a pfadt carbon driveshaft for a C5 6speed, tore the tube down on the C5R car to replace the guibos with DSS ones that finally came in after 4 weeks to find my shaft is bent and guibos are fine. So I'll happy trade stuff add cash if anyone has one. |
Steve send me a price for the catted xpipe. ill swing by and get it. thanks
|
Originally Posted by markiemark
(Post 1582986992)
Steve send me a price for the catted xpipe. ill swing by and get it. thanks
|
All times are GMT -4. The time now is 04:22 PM. |
© 2024 MH Sub I, LLC dba Internet Brands