Wiper arm restoring
 

Hi guys, I'd like to restore the functionality of the left wiper arm. As you can see from the attached picture, I'm missing some hose and other stuff. AIM is not useful... Any picture/help??? thanks

http://imageshack.us/scaled/thumb/52...0123191805.jpg

assuming you have the pipe on the arm, you are only missing the hose from the connector to the arm

Most parts vendors have diagrams. Try Zip as I know they do.

I'm missing everything from the connector and also looking at zip diagrams I dont understand what I have to look at... Thats why I was asking for pictures, its much easier to understand!

Then you need this part which attaches to the arm

http://willcoxcorvette.com/product_i...oducts_id=6995

This shows the complete arm with the pipe attached and the connection to the hose you already have

http://blog.zip-corvette.com/corvett...-1968-1982-c3/

Thanks MelWff! Is there anything else attached to the end of the tube, where the water exits?

Hope this helps.

http://i697.photobucket.com/albums/v...ps17a672dd.jpg

http://i697.photobucket.com/albums/v...ps3e477740.jpg

http://i697.photobucket.com/albums/v...ps90b33eb4.jpg

Yes thank you, that's what I was looking for! :thumbs: