F/s JSB z06 2008 985rwhp 909rwtq
 

This is kinda a feeler but I am thinking about selling my low mileage Z06 and buy 2013 GTR. I am still not sure but I would like to try that plateform. Car is in good condition. I went through a lot to get to this point. I believe I have a very solid setup. Car was driven in nice days and weekends (obviously with only 5k miles). NEVER went to the drag stripe. Only highway pulls and Dyno pulls. Seriously the car wasn't abused. Yes I raced it but that's why it was built for. I was planning to take it to the track and that's why I put a roll bar in it but didn't have the chance and all the tracks around me are not open yet. Here is a list of modifications I have in this car. Feel free to ask questions and I will try to answer them to best of my knowledge.


I WILL START WITH 85K OBO


http://s1059.photobucket.com/user/99...tml?sort=3&o=0

2008 Corvette C6 Z06

*** Factory Options:
- 5800miles
- JSB
- Black/Red 2-Tone Seats
- HUD
- Nav System
- Heated Seats

*** Engine Modification
- LME/RED built 434ci LSX
- Callies Crank/Compstar Rods/Weisco Pistons
- Brodix LS7 6-Bolt Heads
- Dallas Performance 10-Rib F1R Procharger Kit w/ Direct Drive.
- Procharger Race Intercooler with Custom Piping
- IW 10% OD Balancer
- Dweitts Radiator
- RR Duel Fan w/ Fan Switch
- Snow Duel Methanol Kit w/ Rear Hatch Tank.
- LG Longtube Headers
- LG Cat-Back
- Morosso catch can
- katech valve cover w/coil relocation kit
- big red blow off valve


*** Drivetrain Modification
- RPM Stage 5 Built TR6060
- DSS Alum Driveshaft with Alum Couplers
- Brand New Centerforce DYAD Clutch
- ECS Diff Brace
- MGW Short Shifter
- C5 Axles

*** Fuel System Modification
- Full Return System (8an feed 6an return)
- Walbro 450 Intanke
- A&A External System w/ Bosch Pump
- Boost a Pump
- Denso 1600 Injectors
- Wilson Fuel Rails
- Aeromotive Fuel Pressure Regulator

*** Interior/Electronics
- RSD 5point Roll Bar
- 6point Harness (2012 Date) never used
- Autometer Triple Gauge Pod
- AEM Wideband
- Autometer Fuel Pressure
- Autometer Boost
- 2.5 Speed Density Tune
- lloyd skull floor mats

*** Exterior Modification
- Black ZR1 Style Wheels (Z06 specs)
- Painted Black Halo/Top
- Blacked Out Tail Lights and Side Markers
- Lowered
- 5% tint


I am sure I am forgetting some stuff but let me know if you have any questions. Car is located in Denver, CO. pm your number for pictures.

Let me help, great looking car looks like a ZR1.

http://i1059.photobucket.com/albums/...P/IMG_0316.jpg
http://i1059.photobucket.com/albums/...P/IMG_0824.jpg
http://i1059.photobucket.com/albums/...37058430_n.jpg
http://i1059.photobucket.com/albums/...86397633_n.jpg
http://i1059.photobucket.com/albums/...P/IMG_0693.jpg

thank you so much you just made my day :D

Hey 999, no problem buddy. Great build, pm me if you need anymore assistance with posting pictures I will be happy to help :thumbs:

thanks you are the man :) i really appreciate it, btw i just added few pics :rock:

I can vouch for this car. a beast in every way. Very nice car and build. hard to find a nice 1000+whp z06 with less than 6k miles! good luck buddy!!

thanks bro :iagree:

Added

thanks again:D

Tgif :)

what would it cost to put a f1x on this and would the fuel system and other things match up? What would the hp increase to?

im not sure but i think you will use the same bracket , then you need a head unit only , yes the fuel system is good for around 1400 so you will have no problem with the f1x, this car will make it 1k hp , we made 985whp 5200 feet above sea level on the old setup now it has heads , snow meth kit and a bigger intercooler so it should make 1k easily , i would say 1100hp :D im just waiting for my tuner to come back from a trip then we will see what it does :thumbs:

is this still available

It is. But im out of the country now ill be back in jan

Is this your car?

yes sir :cool:

Whats it lowered with? stock bolts cut bushing or what looks good man.

GLWS

Stock bollts, thanks

Absolutely awesome car. GLWS. :thumbs:

Helluva fast car!!! Me likey...:thumbs::thumbs: