CorvetteForum - Chevrolet Corvette Forum Discussion - How to position the rear spindle Teflon washer

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)

- C4 General Discussion (https://www.corvetteforum.com/forums/c4-general-discussion-34/)

- - How to position the rear spindle Teflon washer (https://www.corvetteforum.com/forums/c4-general-discussion/3370646-how-to-position-the-rear-spindle-teflon-washer.html)

Dale002

11-06-2013 10:34 PM

How to position the rear spindle Teflon washer

How is the rear spindle Teflon washer position on the HUB?

vette40509

11-07-2013 12:00 AM

I threw mine away when I put in new bearings......has 185k miles now....no problems.

Dale002

11-07-2013 12:38 AM

Quote:

Originally Posted by vette40509 (Post 1585368145)

I threw mine away when I put in new bearings......has 185k miles now....no problems.

Did you use the dust seals?

Cliff Harris

11-07-2013 01:33 AM

Since you didn't state a year…

I believe the part you're interested in is #39:

http://parts.nalleygmc.com/showAssem...rimLevel=14233

Ray Quayle

11-07-2013 01:43 AM

Quote:

Originally Posted by Dale002 (Post 1585367600)

How is the rear spindle Teflon washer position on the HUB?

Posted by 86PACER back in 2009!
http://forums.corvetteforum.com/1562438578-post7.html
http://img138.imageshack.us/img138/5...spindleny5.jpg

Ray Quayle

11-07-2013 01:48 AM

Quote:

Originally Posted by Cliff Harris (Post 1585368428)

Since you didn't state a year…

I believe the part you're interested in is #39:

That's the one, Cliff! :thumbs:

All times are GMT -4. The time now is 08:03 PM.