|
Clear bra
WHERE DO YOU GET THE CLEAR BRA FOR THE C7?:willy:
|
custom job for now probably, any reputable place should be able to put and stretch the pieces i am not sure if the Xpel website list the custom machined cuts yet or not
|
|
Originally Posted by dvandentop
(Post 1585375399)
|
2 Attachment(s)
I had an XPEL clear bra put on mine last week. I have bubbles on my lower front bumper due to the angles; I have already taken it back once and have to go in again. The pictures below are from two different times.
|
Originally Posted by jdb1218
(Post 1585377452)
I had an XPEL clear bra put on mine last week. I have bubbles on my lower front bumper due to the angles; I have already taken it back once and have to go in again. The pictures below are from two different times.
That's not what I would expect! Guess I will not be getting a clear bra! |
Originally Posted by pgway
(Post 1585377510)
:iagree:
That's not what I would expect! Guess I will not be getting a clear bra! |
Originally Posted by robertbrucef
(Post 1585375230)
WHERE DO YOU GET THE CLEAR BRA FOR THE C7?:willy:
|
I had one installed last week by speed film Roswell Ga. X-pel David cuts his patterns from roll stock, and does a great job
|
Has anyone had the Xpel installed while getting museum delivery?
It is an option I am considering, and while more expensive it appears, at least I'll have some protection on the car for the drive home, especially this time of year. |
Any recommendations near Greenville SC? Or Greenwood SC?
|
GM will be releasing a clear bra product for the C7 available as a Genuine Corvette Accessory (GCA) product and it will be available via the dealer network. You will likely be able to find it through the GM Accessory Zone website when available.
|
I had a 1/4 clear bra installed at my dealership. It covers the nose of the Stingray (up to the hood).
|
Had a clear bra put on about 2 weeks ago using the Xpel. Did front nose, 24" up on the hood, mirrors, and rocker panels. The installer did an flawless job. :D
|
I had museum delivery oct 21. At that time they were not able to do a clear bra, because they were too busy with deliveries. That may have now changed.
|
Originally Posted by talon90
(Post 1585379050)
GM will be releasing a clear bra product for the C7 available as a Genuine Corvette Accessory (GCA) product and it will be available via the dealer network. You will likely be able to find it through the GM Accessory Zone website when available.
|
Originally Posted by Texas_Venom
(Post 1585377519)
Those bubbles are where the installer did not heat the film down. The C7 is a much easier car to install film on than the C6. Find a good installer and you wont have any issues.
|
Is 30 days a reasonable time to wait before installing xpel due to paint curing? Going to do front end wrap on AW.
|
Originally Posted by Seapar
(Post 1585388163)
Is 30 days a reasonable time to wait before installing xpel due to paint curing? Going to do front end wrap on AW.
|
| All times are GMT -4. The time now is 11:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands