** New C7 Front License Plate Brackets Available from Top Flight Reproductions **
C7 Corvette Front License Plate Brackets If you live in a state that requires a front license plate, we have two great solutions for your C7 Corvette. Both of the Top Flight Reproductions front license plate brackets allow more air flow than the standard GM grill mount and attach with just two fasteners. There is no drilling or modifications required to your corvette. ** Features of the "Low Profile Mount" include less blockage of air flow, a sturdy aluminum construction with a black powder coat finish that attaches using existing screws. ** ** Features of the "Grill Mount" include a Slim-Line look, an increase in air flow through the grill compared to the GM mount as well as ease of installation. ** NOTE: The GM C7 and C6 Body Colored License Plate Frames (sold separately) can be used with all of the Top Flight Front License Plate Brackets to enhance the look of the front plate. ORDER HERE: http://www.topflightrepro.com/corvet...brackets.shtml C7 Front License Plate Bracket "Low Profile Mount" Shown with optional GM colored frame http://i113.photobucket.com/albums/n...repro/C7-8.jpg Shown with optional GM colored frame http://i113.photobucket.com/albums/n...repro/C7-2.jpg Mounts to the bottom of the lower front bumper using two existing screws http://i113.photobucket.com/albums/n...epro/C7-10.jpg C7 Front license plate bracket "Grill Mount" Return the GM Front License plate bracket P/N 22830069 back to us and we will issue you core refund (the P/N is located on the back side of the part). Shown with optional GM colored frame http://i113.photobucket.com/albums/n...repro/C7-4.jpg Mounts using the Fastener Kit shown below http://i113.photobucket.com/albums/n...repro/C7-5.jpg Grill Mount Fasteners qty of 2 per kit http://i113.photobucket.com/albums/n...repro/C713.jpg ** Please note that these are not supplied with the above "Grill Mount" Front license Plate Bracket. If you have the GM Grill mount you can use the same two fasteners. If you do not have the GM Grill mount you will need to order this fastener kit. ** |
:cheers:
|
Top Flight, I have the Lashway front splitter on my car (see pic). Will your low profile licence plate mount work with this splitter. Tks Doug
http://i738.photobucket.com/albums/x...ps1ac0fd34.jpg |
Originally Posted by dovervold
(Post 1587107801)
Top Flight, I have the Lashway front splitter on my car (see pic). Will your low profile licence plate mount work with this splitter. Tks Doug
http://i738.photobucket.com/albums/x...ps1ac0fd34.jpg |
:cheers:
|
For those of us who have swapped out to a Z06 grill. Will the grill mount shown (only see a base grill mount here and on your site) work for us?
|
Originally Posted by TJ1
(Post 1589532621)
For those of us who have swapped out to a Z06 grill. Will the grill mount shown (only see a base grill mount here and on your site) work for us?
|
Originally Posted by Top Flight Reproductions
(Post 1589551704)
We are working on the Z06 grill mount :cheers:
|
Originally Posted by TJ1
(Post 1589563946)
Awesome - looking forward to seeing what you come up with! :thumbs:
|
Any news on the Z06 grill mount?
|
Originally Posted by TJ1
(Post 1589718746)
Any news on the Z06 grill mount?
|
Will the C7 Front license plate bracket "Grill Mount" fit the Z06 Grill?
|
Originally Posted by 1KULC7
(Post 1589819022)
Will the C7 Front license plate bracket "Grill Mount" fit the Z06 Grill?
|
How is the grill mount for the 2016 Z06 coming?
D. |
Originally Posted by ZR-1DUDE
(Post 1591904471)
How is the grill mount for the 2016 Z06 coming?
D. |
We got the low profile bracket and installed it. It looks good. A few things to note.
1. The product came without instructions 2. There are no instructions for the C7 on the website that we could find 3. Product requires you to bend the license plate to put it on the bracket Suggestions: Create a video on you tube that shows how to install Provide a list of tools needed Philips Head Screw driver 1/4 inch hex head wench needed to remove and install the bracket under the bumper Flash light to see under the car to find the screws and unscrew them |
Originally Posted by itaylorm
(Post 1593169444)
We got the low profile bracket and installed it. It looks good. A few things to note.
1. The product came without instructions 2. There are no instructions for the C7 on the website that we could find 3. Product requires you to bend the license plate to put it on the bracket Suggestions: Create a video on you tube that shows how to install Provide a list of tools needed Philips Head Screw driver 1/4 inch hex head wench needed to remove and install the bracket under the bumper Flash light to see under the car to find the screws and unscrew them |
6 Attachment(s)
C7 Corvette Front License Plate Brackets If you live in a state that requires a front license plate, we have two great solutions for your C7 Corvette. Both of the Top Flight Reproductions front license plate brackets allow more air flow than the standard GM grill mount and attach with just two fasteners. There is no drilling or modifications required to your corvette. ** Features of the "Low Profile Mount" include less blockage of air flow, a sturdy aluminum construction with a black powder coat finish that attaches using existing screws. ** ** Features of the "Grill Mount" include a Slim-Line look, an increase in air flow through the grill compared to the GM mount as well as ease of installation. ** NOTE: The GM C7 and C6 Body Colored License Plate Frames (sold separately) can be used with all of the Top Flight Front License Plate Brackets to enhance the look of the front plate. ORDER HERE: http://www.topflightrepro.com/corvet...brackets.shtml C7 Front License Plate Bracket "Low Profile Mount" Shown with optional GM colored frame Attachment 48124360 Shown with optional GM colored frame Attachment 48124361 Mounts to the bottom of the lower front bumper using two existing screws Attachment 48124362 C7 Front license plate bracket "Grill Mount" Return the GM Front License plate bracket P/N 22830069 back to us and we will issue you core refund (the P/N is located on the back side of the part). Shown with optional GM colored frame Attachment 48124363 Mounts using the Fastener Kit shown below Attachment 48124364 Grill Mount Fasteners qty of 2 per kit Attachment 48124365 ** Please note that these are not supplied with the above "Grill Mount" Front license Plate Bracket. If you have the GM Grill mount you can use the same two fasteners. If you do not have the GM Grill mount you will need to order this fastener kit. ** |
Trying to decide how/what to order and still would like some info;
1) I like your low profile mount, but it looks like it will cover up my lower full body stripes. It appears to me there would be more air flow however, with the low profile mount over the grill mount? Do I need to be concerned with blocking airflow with the grill mount on my Z06 (pic attached for ref) 2) I can't see on your order site how the 50% off second license plate frame applies? Carbon flash for the rear and either torch red or regular black for the front, suggestions? Thank you for your help! -Garry https://cimg7.ibsrv.net/gimg/www.cor...c2a4c49d95.jpg |
Originally Posted by Top Flight Reproductions
(Post 1594944319)
1) I like your low profile mount, but it looks like it will cover up my lower full body stripes. It appears to me there would be more air flow however, with the low profile mount over the grill mount? Do I need to be concerned with blocking airflow with the grill mount on my Z06 (pic attached for ref) Our grill mount for the Z06 has 20% more airflow than the GM grill mount, you should not have any cooling issues.
2) I can't see on your order site how the 50% off second license plate frame applies? Carbon flash for the rear and either torch red or regular black for the front, suggestions? Carbon flash or Black for the front, if you're ordering two different colors it may not give you the discount, let us know after you order and we will issue you a refund Best Regards Peter C PS; thanks for the t-shirt offer it will have to be for the spousal unit, as I wear a 3XL, but it will work for her :) Thanks, -Garry |
All times are GMT -4. The time now is 09:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands