CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   Mountain - Prairie (https://www.corvetteforum.com/forums/mountain-prairie-46/)
-   -   Recommend got mechanic in UT (https://www.corvetteforum.com/forums/mountain-prairie/3504716-recommend-got-mechanic-in-ut.html)

gongo 07-22-2014 06:28 PM

Recommend good mechanic in UT
 
I'm looking to swap LS7 exhaust manifolds, cats, and h-pipe onto my LS2 vette. I called up JDP Motorsports in Sandy and their tech told me it can't be done... and then recommended that I just have a muffler shop cut open my mufflers if I want more flow and sound...

Needless to say, I'm not going to have them do the swap.

Can you guys recommend anyone in Utah County/Salt Lake that is knowledgeable with Corvettes?

JDP Motorsports 07-23-2014 12:08 PM


Originally Posted by gongo (Post 1587421500)
I'm looking to swap LS7 exhaust manifolds, cats, and h-pipe onto my LS2 vette. I called up JDP Motorsports in Sandy and their tech told me it can't be done... and then recommended that I just have a muffler shop cut open my mufflers if I want more flow and sound...

Needless to say, I'm not going to have them do the swap.

Can you guys recommend anyone in Utah County/Salt Lake that is knowledgeable with Corvettes?

I apologize for the bad information.. We've done the LS7 to LS2 swaps without issues. I think Tyler got confused when I was talking to him about it. I would not recommend cutting the factory mufflers open; we'd go with an axle-back if you were looking for more sound volume.

Please give us a call and ask for Jordan and we'll get it set up for you. I appreciate your interest in our services and have a great day.

Kind regards,

Jordan Priestley
801-545-4215

gongo 07-25-2014 06:47 PM

I got off work early and dropped by JDP to chat with Jordan.
He's a real stand up guy who knows his stuff.
Seems I just had a miscommunication with the tech on the phone the other day.
I'll be going ahead with some work and a tune at JDP.
Thanks!

MasterDave 07-25-2014 07:34 PM

Requested by OP to close


All times are GMT -4. The time now is 12:13 AM.


© 2024 MH Sub I, LLC dba Internet Brands