Stout street 496,
 

Less than 500 miles on engine; $6000.00

GM 4 bolt block / studded bottom end.
Eagle +.250 rods
Eagle forged crank
Edelbrock Oval (ported by Bob Mckay)
Edelbrock RPM Air Gap (center divider milled)
Solid roller 255 / 262 on a 112
Moroso pan that will fit in a 69 corvette
Holly HP 1000
Ross custom nitrous pistons will Hellfire rings.
Copper head gaskets with O-rings.

I never dyno'd the engine, but as a 460 it went 124 Mph (1/4 mile) the only time I ever took it to the track. It has to make well over 600 HP as a 496.

This engine was built to be a very stout pump gas engine to use in my 69 vette. I decided to go more radical and built a 572, so the 496 is for sale. If you are interested send me a PM or an email and I would be glad to give you the complete history of the engine. The engine needs to go.

I also have headers (2 1/8 Hooker Super Comps) and a 3 in exhaust that would be a great compliment to the 496.

I am glad to provide more details and pics:
iangetbacktowork@gmail.com

John

Bump...

Bump