CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   C6 Corvette General Discussion (https://www.corvetteforum.com/forums/c6-corvette-general-discussion-74/)
-   -   Inexpensive Mods to Share With You Guys (https://www.corvetteforum.com/forums/c6-corvette-general-discussion/3593726-inexpensive-mods-to-share-with-you-guys.html)

CMEGONE 01-19-2015 05:34 PM

Inexpensive Mods to Share With You Guys
 
Just wanted to share what I have done with my vette in the past month and encourage fellow vette owners to do some inexpensive mods if you are bored during the winter months and want to work on your vette. I didn't want to spend a ton of money and wanted to convert back to stock easily, so I chose these methods.

I added the 3m black wrap to the halo. It costs me $30 for a 5ft x 2ft (10 Sq/ft) 3M GLOSS Black G12 Scotchprint Car Wrap Vinyl Film 1080 Series" from Amazon. It was kind of a P.I.T.A. to install this correctly. After a few hours of trial and error I got it on decent but I am still not happy with it because of some small imperfections. But then again I am a perfectionist so I am never happy with anything lol.

And just yesterday added the lemans blue wheel stripes lips to match the body color. I thought about getting it professionally painted but didn't want to spend the money. So I found a decal seller on ebay and sent him a picture of the lemans blue and asked him to match it as close as possible. He got it right on the spot! So basically you tell him your wheel size and he cuts the correct diameter and you just peel and stick! It's that easy. It came out surprisingly nice and for $7 and an hour of my time (includes clean and prep), I am extremely happy. And I can always go peel them off and go back to all black if desired.

And last but not least I added the extended ZR1 rear spoiler from C7 carbon. This one isn'[t as inexpensive as the ones above but just wanted to share. I had it laying around for a while but was on the fence of replacing it with the GM full length spoiler I already had on. Well, I am glad I did because it looks pretty mean IMO.


https://cimg7.ibsrv.net/gimg/www.cor...64713838a2.jpg



https://cimg0.ibsrv.net/gimg/www.cor...799a7b230d.jpg


https://cimg3.ibsrv.net/gimg/www.cor...8ccab26750.jpg

EVRose 01-19-2015 05:41 PM

Looks Great! I did the halo wrap too. It was the first time I tried using that stuff and it came out pretty good but like you said has small imperfections. Getting it tucked between the rear window and the halo was a real PITA. If I ever redo it I'll take the halo off the car first.

Cor430vette 01-19-2015 05:42 PM

Super cool ...love the jakes!:thumbs:

VET4LES 01-19-2015 06:53 PM

:cool: :thumbs:

C6z06man 01-19-2015 06:58 PM

Nice! Looks good.

trebor8008 01-19-2015 07:13 PM

The color matched stripe on the wheels looks great. :thumbs: I might just check that out myself and see if they can match the flourescent yellow I have on my calipers and emblems. Who did you go through for them(PM please).
:D

Bill Hoch 01-19-2015 07:40 PM

:lurk: for info on where you got the color matched stipe for the wheels.

Mods look great! :thumbs:

jrose7004 01-19-2015 07:56 PM

Good job!

1rusty1 01-19-2015 09:08 PM

I love the color matched items and love the look on your rims.

I did the same on my rims but decided to change it up. It was an inexpensive addition and it's the first MOD people ask about and give positive comments at the car shows I have entered.



https://cimg3.ibsrv.net/gimg/www.cor...431556ed5f.jpg

Enterprisehunter 01-19-2015 09:37 PM

Is the C7 Extended Spoiler the carbon version or fiberglass? Did you do something to your diffuser? What skirts and splitter did you get?

CMEGONE 01-19-2015 11:16 PM

Thanks for all the compliments guys!

CMEGONE 01-19-2015 11:19 PM


Originally Posted by Bill Hoch (Post 1588759105)
:lurk: for info on where you got the color matched stipe for the wheels.

Mods look great! :thumbs:

Thanks for the complement! The eBay member I got them from was cgd_graphics. Here is a link to the eBay item.
http://www.ebay.com/itm/281521005007?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

CMEGONE 01-19-2015 11:24 PM


Originally Posted by Cor430vette (Post 1588758182)
Super cool ...love the jakes!:thumbs:

Yeah me too! Another cheap mod for under $5 on eBay!

CMEGONE 01-19-2015 11:26 PM


Originally Posted by Enterprisehunter (Post 1588760151)
Is the C7 Extended Spoiler the carbon version or fiberglass? Did you do something to your diffuser? What skirts and splitter did you get?

It is the fiberglass version. The diffuser is the same. All I did was black out the reverse lights. The skirts and splitter are also from C7 carbon. They are the ZR1 version for the base C6.

ignatkor 01-19-2015 11:26 PM


Originally Posted by CMEGONE (Post 1588758125)
Just wanted to share what I have done with my vette in the past month and encourage fellow vette owners to do some inexpensive mods if you are bored during the winter months and want to work on your vette. I didn't want to spend a ton of money and wanted to convert back to stock easily, so I chose these methods.

I added the 3m black wrap to the halo. It costs me $30 for a 5ft x 2ft (10 Sq/ft) 3M GLOSS Black G12 Scotchprint Car Wrap Vinyl Film 1080 Series" from Amazon. It was kind of a P.I.T.A. to install this correctly. After a few hours of trial and error I got it on decent but I am still not happy with it because of some small imperfections. But then again I am a perfectionist so I am never happy with anything lol.

And just yesterday added the lemans blue wheel stripes lips to match the body color. I thought about getting it professionally painted but didn't want to spend the money. So I found a decal seller on ebay and sent him a picture of the lemans blue and asked him to match it as close as possible. He got it right on the spot! So basically you tell him your wheel size and he cuts the correct diameter and you just peel and stick! It's that easy. It came out surprisingly nice and for $7 and an hour of my time (includes clean and prep), I am extremely happy. And I can always go peel them off and go back to all black if desired.

And last but not least I added the extended ZR1 rear spoiler from C7 carbon. This one isn'[t as inexpensive as the ones above but just wanted to share. I had it laying around for a while but was on the fence of replacing it with the GM full length spoiler I already had on. Well, I am glad I did because it looks pretty mean IMO.


https://cimg7.ibsrv.net/gimg/www.cor...64713838a2.jpg



https://cimg0.ibsrv.net/gimg/www.cor...799a7b230d.jpg


https://cimg3.ibsrv.net/gimg/www.cor...8ccab26750.jpg

Great looking vette! Love the black wheel choice and the spoiler. The only thing I don't like is the blue skulls in the center of the wheel.....

CMEGONE 01-20-2015 04:13 PM

The decal guys direct email is certifieddecals@live.com for those of you interested. Just mention the forum and that I sent you and he'll hook you up. His name is Brian.

CaliKushMan 02-13-2015 08:10 AM

Thanks for the post. Appreciate the pictures. Been looking to do the zr1 spoiler, lip and side skirts to my lemans blue black on black vette.

If you could post some more pics or point me to the right direction to look at pics of your vette some more. That would be great.

Nice vette by the way.

Seadawg 02-13-2015 08:27 AM


Originally Posted by 1rusty1 (Post 1588759909)
I love the color matched items and love the look on your rims.

I did the same on my rims but decided to change it up. It was an inexpensive addition and it's the first MOD people ask about and give positive comments at the car shows I have entered.



https://cimg3.ibsrv.net/gimg/www.cor...431556ed5f.jpg

Now that is a shine! And those red stripes do set off those wheels :thumbs:


All times are GMT -4. The time now is 07:14 PM.


© 2024 MH Sub I, LLC dba Internet Brands