Parting out 1984 Corvette
I am parting out a 1984 Corvette. Car is complete, lots of parts to be had. Nothing has been taken off yet. Here is a list of some items I have a price on but feel free to contact me for anything you need and I will check the part out and let you know a price. Here is a listing of some of the big stuff but contact me for anything specific. I can text or email photos if needed. Check this Youtube link to see a video of the car:
https://www.youtube.com/watch?v=Tqph...ature=youtu.be All big items are available for pickup I am in the 62025 zip code. Right and left door complete. $200 each Rear bumper $200 Front bumper $200 Headlights $150 each or $250 for the set (need new gear on driver side) Hood (very rough but usable) $50 Both seats (passenger side not bad, driver side needs recovered, back trim is nice) $150 for the pair An extra set of black door trim panels in good shape $100 for both. Set of wheels, decent shape, tires are dry. $250 for set Engine, 175K $500 (complete with everything, starter, compressor, alt..etc) or $400 without crossfire injection. Transmission (not out of Vette but taken from a Camaro to replace the bad transmission taken out of Vette) $150 Targa top (Solid top not plexiglass. No headliner, needs repainted) $300 Exhaust (Original exhaust with mufflers and catalytic converter, in good shape) $100 Back glass with third brake light $60 Driveshaft $50 RD Racing Crossbar $200 Complete rear end with half shafts, control arms, spindles, leaf spring... entire thing $800. All parts are still on the car, will take off as I sell. |
R&D Racing Crossbar
Good morning, do you know if this crossbar will fit a convertible? Would I be able to get pictures sent to me?
Thank you Chad |
Crossbar
Hi,
I could send you some pictures late tonight if you need any (at work now) or you can go to a Craigslist ad I have that has a lot of photos of the car including the crossbar at http://stlouis.craigslist.org/pts/4913338955.html There is a link to a video in the ad where I do a walk around of the car and I show the crossbar in that too. I would think it would work in a convertible since it mounts right behind the seats and it shouldn't interfere with anything. You should be able to tell by the photos. If you need additional shots or more info let me know.j |
After I did some research I found out, I have to find something out of 91or later. Thank you for the reply!
|
Powered Seat Racks
Hi - If you have good powered seat tracks, I would be interested. Let me know a price. I need both the driver and passenger side seat power tracks.
wemery@outlook.com Thanks, 3ddriver |
can you post a photo of the seats?
|
Hey there, Do you have any parts left from that '84 Corvette thats up for be parted out!??!! I am looking for a parts for my '84 Corvette Crossfire!!!
|
Parts
Yes, I have a lot of stuff left. Let me know what you need.
|
Originally Posted by HughG
(Post 1589334324)
Yes, I have a lot of stuff left. Let me know what you need.
Im looking for the Rack and Pinion, price shipped to GA 30338 Thanks Allen |
Hi. You mention a set of black door panels. Are they complete with the speaker covers, arm rests and the upper plastic piece that holds the felt for the inside door windows? If so, I will buy them, if you still have them that is. My interior is black and I have been looking for these to complete my interior.
Thanks Russ |
PM sent.
|
Drivers side door mirror?
|
again, PM sent...
|
Just checking about the door panels again.
Thanks Russ |
hello - anyone out there? for the third time, PM sent. :D
edit: just realized, HughG hasn't posted or replied to this thread in 3 months... |
Looking for drivers door triangle piece with switches
aAlso instrument cluster 84 corvette |
Targa top
I know this is a older listing but I'm in need of a targa top for my c4 1985 targa top
Just thought I'd check Monte k Anderson IN
Originally Posted by HughG
(Post 1589100017)
I am parting out a 1984 Corvette. Car is complete, lots of parts to be had. Nothing has been taken off yet. Here is a list of some items I have a price on but feel free to contact me for anything you need and I will check the part out and let you know a price. Here is a listing of some of the big stuff but contact me for anything specific. I can text or email photos if needed. Check this Youtube link to see a video of the car:
https://www.youtube.com/watch?v=Tqph...ature=youtu.be All big items are available for pickup I am in the 62025 zip code. Right and left door complete. $200 each Rear bumper $200 Front bumper $200 Headlights $150 each or $250 for the set (need new gear on driver side) Hood (very rough but usable) $50 Both seats (passenger side not bad, driver side needs recovered, back trim is nice) $150 for the pair An extra set of black door trim panels in good shape $100 for both. Set of wheels, decent shape, tires are dry. $250 for set Engine, 175K $500 (complete with everything, starter, compressor, alt..etc) or $400 without crossfire injection. Transmission (not out of Vette but taken from a Camaro to replace the bad transmission taken out of Vette) $150 Targa top (Solid top not plexiglass. No headliner, needs repainted) $300 Exhaust (Original exhaust with mufflers and catalytic converter, in good shape) $100 Back glass with third brake light $60 Driveshaft $50 RD Racing Crossbar $200 Complete rear end with half shafts, control arms, spindles, leaf spring... entire thing $800. All parts are still on the car, will take off as I sell. |
Originally Posted by monte k
(Post 1591417696)
I know this is a older listing but I'm in need of a targa top for my c4 1985 targa top
Just thought I'd check Monte k Anderson IN |
Hugh, I'm looking for a working headlight switch, a working power mirror switch, and possibly the lock cylinders out of the doors with the switches and linkages.
|
dana 36 307 pumpkin only don't need rest offer? reply to gcgroom@gmail.com as I check that more than here tks GG
|
All times are GMT -4. The time now is 01:34 PM. |
© 2024 MH Sub I, LLC dba Internet Brands