CorvetteForum - Chevrolet Corvette Forum Discussion

CorvetteForum - Chevrolet Corvette Forum Discussion (https://www.corvetteforum.com/forums/)
-   Canadian Events (https://www.corvetteforum.com/forums/canadian-events-97/)
-   -   2010 ZR1 Dyno (https://www.corvetteforum.com/forums/canadian-events/3626295-2010-zr1-dyno.html)

Rob@ChampionMotors 03-24-2015 11:10 PM
2010 ZR1 Dyno
 
2 Attachment(s)
We baseline dyno this ZR1 before modding it 522 rwhp.
Next:D
Lingenfelter 710 kit
GT9 camshaft
American Racing Headers

RedZ4me 03-25-2015 03:03 PM
seems lower than the typical zr1

Rob@ChampionMotors 03-25-2015 03:32 PM
Originally Posted by RedZ4me (Post 1589265088)
seems lower than the typical zr1
We have tested others a 09 stock which made 518 rwhp and a 2011 with 528 rwhp.
:cheers:

Rob@ChampionMotors 03-27-2015 07:53 AM
1 Attachment(s)
Here is comparison stock to LPE snout

tlaselva 03-27-2015 02:38 PM
Looking forward to the results! :thumbs:

JMB 06-25-2021 11:53 PM
=Rob@ChampionMotors;1589260841]We baseline dyno this ZR1 before modding it 522 rwhp.
How many degrees of timing?

VETFEVER 06-26-2021 10:46 AM
Originally Posted by RedZ4me (Post 1589265088)
seems lower than the typical zr1
I have heard some say the driveline losses on a ZR1 are as high as 18%. An 18% loss on 638 crank would yield 523 WHP.

JMB 06-26-2021 12:21 PM
Originally Posted by VETFEVER (Post 1603646338)
I have heard some say the driveline losses on a ZR1 are as high as 18%. An 18% loss on 638 crank would yield 523 WHP.
The actual number is closer to 10% since the ZR1 shares the same drive system as the Z06. This was proven by Victor (FNBADZ)6) when he dnoed his engine at 765 HP, it made ~670 on a Dyno with 3.90 gears which are about 3% less effiecent on the dyno as 3.42's!

eboggs_jkvl 06-26-2021 07:28 PM
Necro thread of 6 years.
https://www.ls2.com/forums/images/smilies/lock.gif


All times are GMT -4. The time now is 05:21 PM.


© 2024 MH Sub I, LLC dba Internet Brands