These are outstanding quality and fit. There were ZERO issues installing in my driveway in less than two hours. I would highly recommend John@carravagio corvettes if you had to skip the aero because of constraints like me. If you haven't taken delivery yet and plan this route tell your dealer to leave off the stage 1 splitter as you can sell and you don't have to remove to install the new splitter. I absolutely love the way the car looks now. Much more complete.
*Also you need to purchase the undertray to install the front splitter. I ordered the oem one from Katech and they shipped right away. Also a great forum sponsor. GMP-23163400 C7 Z06/Z07 Stage 2/3 Undertray |
Looks amazing. You are going to be even more pissed than I was the first time I scraped my CFV, though :thumbs:
Enjoy it! |
Looks great. However the less than 4" clearance for the front splitter scares me due to my curbed driveway.
Also, what rear spoiler are you running? OEM Stage 2? |
I upgraded to the stage 3 from cultrag performance.
https://cimg8.ibsrv.net/gimg/www.cor...e1f6f9d7f3.jpg I have a curbed driveway also and no issues here. I am lowered all the way on stock bolts non z07 |
I have the Caravaggio CFV and am at stock height of 6" on the front splitter....don't think I want to go any lower due to various driveway angles.
I am Stage 3 except for the front Splitter end caps. On my Black Z06 they are beautiful...great work by John! :) |
Originally Posted by Stealth07C6
(Post 1589394412)
I upgraded to the stage 3 from cultrag performance.
https://cimg8.ibsrv.net/gimg/www.cor...e1f6f9d7f3.jpg I have a curbed driveway also and no issues here. I am lowered all the way on stock bolts non z07 Good to know you aren't scraping after lowering on stock bolts. I live in FL and many of our side access roads into gas stations, restaurants, etc. have a higher than normal pitch in order to promote heavy rain run-off so I've learned to be careful over the years. My C5 vert is lowered on stock bolts but not all the way. The Koni shocks I installed also brought it down a touch and I'm always scraping the lower OEM flex spoiler. :ack: |
Originally Posted by Stealth07C6
(Post 1589393668)
These are outstanding quality and fit. There were ZERO issues installing in my driveway in less than two hours. I would highly recommend John@carravagio corvettes if you had to skip the aero because of constraints like me. If you haven't taken delivery yet and plan this route tell your dealer to leave off the stage 1 splitter as you can sell and you don't have to remove to install the new splitter. I absolutely love the way the car looks now. Much more complete.
*Also you need to purchase the undertray to install the front splitter. I ordered the oem one from Katech and they shipped right away. Also a great forum sponsor. GMP-23163400 C7 Z06/Z07 Stage 2/3 Undertray |
Originally Posted by MSG C5
(Post 1589394632)
Thanks. The Cultrag spoiler looks great. What is the main difference beteen their spoiler and the OEM Stage 3?
Good to know you aren't scraping after lowering on stock bolts. I live in FL and many of our side access roads into gas stations, restaurants, etc. have a higher than normal pitch in order to promote heavy rain run-off so I've learned to be careful over the years. My C5 vert is lowered on stock bolts but not all the way. The Koni shocks I installed also brought it down a touch and I'm always scraping the lower OEM flex spoiler. :ack: |
Originally Posted by Alaska SS
(Post 1589394654)
Thanks for the info on the undertray!!! I just ordered it from Katech. Mt car is supposed to be here on the 21st and I've had John's parts sitting in the house patiently waiting. The Carravagio parts are amazing! Glad you posted this or I wouldn't have been able to instal mine when the car arrives. Thanks!!!!! Amazing car by the way...beautiful!!!!
|
Originally Posted by Stealth07C6
(Post 1589395222)
No problem. Thanks for the compliments.
|
Originally Posted by Stealth07C6
(Post 1589395216)
The cultrag stuff is OEM. Perfect fit and comes in the GM box.
:thumbs: |
Driver's side rocker extension
near front of door, first photograph, is that a gap? passenger side does not show the gap. maybe just a optical, hope so.
|
Sweet ride!
|
Originally Posted by rockit1
(Post 1589396185)
near front of door, first photograph, is that a gap? passenger side does not show the gap. maybe just a optical, hope so.
|
Originally Posted by Stealth07C6
(Post 1589393668)
These are outstanding quality and fit. There were ZERO issues installing in my driveway in less than two hours. I would highly recommend John@carravagio corvettes if you had to skip the aero because of constraints like me. If you haven't taken delivery yet and plan this route tell your dealer to leave off the stage 1 splitter as you can sell and you don't have to remove to install the new splitter. I absolutely love the way the car looks now. Much more complete.
*Also you need to purchase the undertray to install the front splitter. I ordered the oem one from Katech and they shipped right away. Also a great forum sponsor. GMP-23163400 C7 Z06/Z07 Stage 2/3 Undertray |
Caravaggio Splitter and Rockers
Originally Posted by John@Caravaggio Corvettes
(Post 1589406127)
Nick, parts look great on the car. Enjoy
|
All times are GMT -4. The time now is 06:37 PM. |
© 2024 MH Sub I, LLC dba Internet Brands